Experimental Investigation of the Natural Vortex Length in Tangential Inlet Cyclones

被引:7
作者
Avci, Atakan [1 ]
Karagoz, Irfan [1 ]
Surmen, Ali [1 ]
Camuz, Ibrahim [1 ]
机构
[1] Uludag Univ, Dept Mech Engn, Bursa, Turkey
关键词
cyclone design; cyclone separator; swirl flow; vortex length; PNEUMATIC EXTRACTION; PRESSURE-DROP; PARTICLE FLOW; SEPARATORS; GAS; EFFICIENCY; PERFORMANCE;
D O I
10.1080/01496395.2012.675003
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In this study, the natural vortex length has been investigated experimentally under the effects of inlet gas velocity, diameter, and insertion length of the vortex finder and surface friction in a special designed cyclone which has a double cylindrical body without cone. Experimental results show that, comparing to the other parameters, the height of the frictional surface and inlet gas velocity affect the natural vortex length considerably. The natural vortex length increases with the increase of inlet velocity and with the decrease of the height of the frictional surface. It was also observed that when the diameter of the vortex finder increases, the natural vortex length increases up to certain point and starts to decrease after that.
引用
收藏
页码:122 / 126
页数:5
相关论文
共 21 条
  • [1] Alexander R. M., 1949, P AUSTR I MINERALS M, V152/153, P202
  • [2] Effects of flow and geometrical parameters on the collection efficiency in cyclone separators
    Avci, A
    Karagoz, I
    [J]. JOURNAL OF AEROSOL SCIENCE, 2003, 34 (07) : 937 - 955
  • [3] BRYANT HS, 1983, HYDROCARB PROCESS, V62, P87
  • [5] Modeling the gas and particle flow inside cyclone separators
    Cortes, Cristobal
    Gil, Antonia
    [J]. PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2007, 33 (05) : 409 - 452
  • [6] Simulation of vortex core precession in a reverse-flow cyclone
    Derksen, JJ
    Van den Akker, HEA
    [J]. AICHE JOURNAL, 2000, 46 (07) : 1317 - 1331
  • [7] Gil A, 2002, CHEM ENG TECHNOL, V25, P407, DOI 10.1002/1521-4125(200204)25:4<407::AID-CEAT407>3.0.CO
  • [8] 2-4
  • [9] Gas-particle flow inside cyclone diplegs with pneumatic extraction
    Gil, A
    Cortés, C
    Romeo, LM
    Velilla, J
    [J]. POWDER TECHNOLOGY, 2002, 128 (01) : 78 - 91
  • [10] Cold flow model of a PFBC cyclone
    Gil, A
    Romeo, LM
    Cortés, C
    [J]. POWDER TECHNOLOGY, 2001, 117 (03) : 207 - 220