Effect of cooling structure on thermal behavior of copper plates of slab continuous casting mold

被引：10
作者：
Meng Xiang-ning [1 ]
Zhu Miao-yong [1 ]
机构：
[1] Northeastern Univ, Sch Met & Mat, Shenyang 110819, Peoples R China
来源：
JOURNAL OF CENTRAL SOUTH UNIVERSITY | 2013年 / 20卷 / 02期
基金：
中国国家自然科学基金;
关键词：
slab continuous casting; mold; copper plate; cooling structure; thermal behavior; finite element analysis; MECHANICAL-BEHAVIOR; HEAT-TRANSFER; STEEL SOLIDIFICATION; FLUX; SPEED; CRACK; MODEL;
D O I：
10.1007/s11771-013-1490-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A three-dimensional finite-element model of slab continuous casting mold was conducted to clarify the effect of cooling structure on thermal behavior of copper plates. The results show that temperature distribution of hot surface is mainly governed by cooling structure and heat-transfer conditions. For hot surface centricity, maximum surface temperature promotions are 30 A degrees C and 15 A degrees C with thickness increments of copper plates of 5 mm and nickel layers of 1 mm, respectively. The surface temperature without nickel layers is depressed by 10 A degrees C when the depth increment of water slots is 2 mm and that with nickel layers adjacent to and away from mold outlet is depressed by 7 A degrees C and 5 A degrees C, respectively. The specific trend of temperature distribution of transverse sections of copper plates is nearly free of cooling structure, but temperature is changed and its law is similar to the corresponding surface temperature.
引用
收藏
页码：318 / 325
页数：8
相关论文
共 16 条
  • [11] The effect of mould flux properties on thermo-mechanical behaviour during billet continuous casting
    Saraswat, Rajil
    Maijer, Daan M.
    Lee, Peter D.
    Mills, Kenneth C.
    [J]. ISIJ INTERNATIONAL, 2007, 47 (01) : 95 - 104
  • [12] SAVAGE J, 1954, J IRON STEEL I, V178, P269
  • [13] Three dimensional turbulent fluid flow and heat transfer mathematical model for the analysis of a continuous slab caster
    Shamsi, M. R. R. I.
    Ajmani, S. K.
    [J]. ISIJ INTERNATIONAL, 2007, 47 (03) : 433 - 442
  • [14] Modeling of the continuous casting of steel-past, present, and future
    Thomas, BG
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2002, 33 (06): : 795 - 812
  • [15] Longitudinal crack on slab surface at straightening stage during continuous casting using finite element method
    Yu Hai-liang
    Liu Xiang-hua
    [J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2010, 17 (02): : 235 - 238
  • [16] Effect of low-frequency rotary electromagnetic-field on solidification structure of continuous casting austenitic stainless steel
    Zhou Shu-cai
    Bai Chen-guang
    Lei Ya
    Ren Zheng-de
    Cao Peng-jun
    Yang Zhi-li
    [J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2009, 16 (03): : 360 - 364
12