A synthesis of geometry effect on brittle fracture

被引：24

作者：

Razavi, N. ^{[1
]}

Ayatollahi, M. R. ^{[2
]}

Berto, F. ^{[1
]}

机构：

[1] Norwegian Univ Sci & Technol NTNU, Dept Mech & Ind Engn, Richard Birkelands Vei 2b, N-7491 Trondheim, Norway

[2] Iran Univ Sci & Technol, Ctr Excellence Expt Solid Mech & Dynam, Sch Mech Engn, Fatigue & Fracture Lab, Tehran 16846, Iran

来源：

ENGINEERING FRACTURE MECHANICS | 2018年 / 187卷

关键词：

Average strain energy density criterion; Brittle fracture; Geometry effect; T-stress; Finite element analysis; STRAIN-ENERGY; MODE-I; SEMICIRCULAR SPECIMENS; SOFT ROCK; T-STRESS; TOUGHNESS; VOLUME; BEHAVIOR; CRITERIA; ROOT;

D O I：

10.1016/j.engfracmech.2017.10.022

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

There are numerous analytical solutions in order to take into account the geometry effect on the fracture toughness and the fracture load of the cracked specimens. However, due to the complexities of the mentioned criteria it is practical to have an engineering method which can be used for fracture prediction in cracked samples of various shapes and loading conditions. In this paper, the fracture behaviors of five different testing samples made of various brittle and quasi-brittle materials have been studied using an energy based criterion namely the Average Strain Energy Density (ASED) criterion. According to the formulation of the ASED criterion, all the stress terms around the crack tip were taken into account and the brittle fracture of different samples with various geometry constraints were well predicted. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：94 / 102

页数：9

共 50 条

[41] On Influence of Non-Singular Stress States on Brittle Fracture
David Gardeazabal
Zhuang He
Andrei Kotousov
International Journal of Fracture, 2014, 185 : 201 - 208
[42] Brittle fracture: Variation of fracture toughness with constraint and crack curving under mode I conditions
Chao, YJ
Liu, S
Broviak, BJ
EXPERIMENTAL MECHANICS, 2001, 41 (03) : 232 - 241
[43] Brittle fracture: Variation of fracture toughness with constraint and crack curving under mode I conditions
Y. J. Chao
S. Liu
B. J. Broviak
Experimental Mechanics, 2001, 41 : 232 - 241
[44] Mode II Brittle Fracture Assessment Using ASFPB Specimen
Aliha, M. R. M.
Ayatollahi, M. R.
Kharazi, B.
INTERNATIONAL JOURNAL OF FRACTURE, 2009, 159 (02) : 241 - 246
[45] The effect of T-stress on the brittle fracture under mixed mode loading
Sedighiani, K.
Mosayebnejad, J.
Ehsasi, H.
Sahraei, H. R.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
[46] A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials
Ayatollahi, M. R.
Moghaddam, M. Rashidi
Berto, F.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2015, 79 : 70 - 76
[47] Brittle fracture and ductile fracture
Leblond, JB
COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE PHYSIQUE ASTRONOMIE, 1998, 326 (04): : 243 - 250
[48] STABLE FRACTURE TESTING OF BRITTLE MATERIALS
Baudin, C.
Garcia-Prieto, A.
MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES XI, 2017, 37 (02): : 13 - 27
[49] Controlled fracture test for brittle ceramics
Garcia-Prieto, A.
Hernandez, J.
Lopez, M.
Baudin, C.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2011, 46 (01) : 27 - 32
[50] Development of maximum tangential strain (MTSN) criterion for prediction of mixed-mode I/III brittle fracture
Bidadi, Jamal
Aliha, M. R. M.
Akbardoost, Javad
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2022, 256

← 1 2 3 4 5 →