Microstructure and mechanical properties of friction stir processed Al-Mg2Si alloys

被引:0
|
作者
Qin, Qing-dong [1 ]
Zhao, Hong-long [1 ]
Li, Juan [2 ]
Zhang, Ying-zhe [3 ]
Su, Xiang-dong [1 ]
机构
[1] Guizhou Inst Technol, Key Lab Light Met Mat Proc Technol Guizhou Prov, Guiyang 550003, Peoples R China
[2] Guizhou Inst Technol, Sch Mat & Energy Engn, Guiyang 550003, Peoples R China
[3] 2011 Special Funct Mat Collaborat Innovat Ctr Gui, Guiyang 550003, Peoples R China
基金
中国国家自然科学基金;
关键词
Al-Mg2Si alloy; friction stir processing; ultimate tensile strength; microstructural evolution; defect; DISSIMILAR ALUMINUM; PRIMARY MG2SI; FABRICATION; EVOLUTION; BEHAVIOR; JOINTS; SB;
D O I
10.1016/S1003-6326(20)65384
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The microstructure and mechanical properties of friction stir processed Al-Mg2Si alloys were studied by TEM and EBSD. The results showed that an increase in the tool rotation speed (300-700 r/min) led to a decrease in the defect area (from 10.5 mm(2) to zero), whereas the defect area demonstrated the opposite trend (increased to 1.5 mm(2) from zero) upon further increasing the rotation speed (700-1200 r/min). The types of defects were transformed from tunnel defects to fusion defects as the rotational speed increased. The coarse Mg2Si dendrites were broken and fine particles (smaller than 10 mu m) formed in the weld nugget (WN). The amount of low-angle grain boundaries increased significantly from 57.7% to 83.6%, which was caused by an increase in the content of the deformed structure (from 1.7% to 13.6%). The hardness, ultimate tensile strength (UTS) and elongation were all greatly improved for the weld nugget. The hardness values of the WNs had the following order: R300<R1200<R500<R900<R700. The UTS and elongation had the following order: BM (base material)<R300<R1200<R500<R900<R700. The UTS and the elongation for the WN were increased by one and three times, respectively.
引用
收藏
页码:2355 / 2368
页数:14
相关论文
共 50 条
  • [21] MICROSTRUCTURE, TEXTURE AND MECHANICAL PROPERTIES OF A FRICTION-STIR-PROCESSED Mg-Al-Ca-Mn-Zn ALLOY
    Song, Leipeng
    Zhang, Yang
    Lu, Yalin
    Li, Xingcheng
    Wang, Jian
    Wang, Jiangtao
    MATERIALI IN TEHNOLOGIJE, 2019, 53 (06): : 839 - 844
  • [22] Microstructure and tensile properties of a friction stir welded Al-Mg-Si alloy
    Sukedai, Eiichi
    Yokoyama, Takashi
    Song, Minghui
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2014, 105 (09) : 883 - 893
  • [23] Improving microstructure and mechanical properties of hypoeutectic Al-Mg2Si alloy by Gd addition
    Wang, Ke-Yan
    Zhao, Rong-Da
    Wu, Fu-Fa
    Wu, Xiao-Feng
    Chen, Ming-Hua
    Xiang, Jun
    Chen, Shun-Hua
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 813
  • [24] Microstructure and mechanical behavior of friction stir processed ultrafine grained Al-Mg-Sc alloy
    Kumar, N.
    Mishra, R. S.
    Huskamp, C. S.
    Sankaran, K. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (18): : 5883 - 5887
  • [25] Microstructure evolution and mechanical properties of friction stir processed TiC/7085Al nanocomposites
    Zhou, Dongshuai
    Wang, Jian
    Lu, Yalin
    Bai, Zhihao
    MATERIALS RESEARCH EXPRESS, 2020, 7 (03)
  • [26] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION STIR PROCESSED ULTRAFINE-GRAINED AND NANOSTRUCTURED Cu-Al ALLOYS
    Xue Peng
    Xiao Bolu
    Ma Zongyi
    ACTA METALLURGICA SINICA, 2014, 50 (02) : 245 - 251
  • [27] Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite
    Nami, H.
    Adgi, H.
    Sharifitabar, M.
    Shamabadi, H.
    MATERIALS & DESIGN, 2011, 32 (02) : 976 - 983
  • [28] Mechanical properties of Al-Mg alloys with equiaxed grain structure produced by friction stir processing
    Zhang, L.
    Liu, C. Y.
    Zhang, B.
    Huang, H. F.
    Xie, H. Y.
    Cao, K.
    MATERIALS CHEMISTRY AND PHYSICS, 2023, 294
  • [29] Inhomogeneous microstructure and mechanical properties of friction stir processed NiAl bronze
    Ni, D. R.
    Xue, P.
    Wang, D.
    Xiao, B. L.
    Ma, Z. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 524 (1-2): : 119 - 128
  • [30] Effect of Tool Pin Profile on the Microstructure and Tribological Properties of Friction Stir Processed Al-20 wt% Mg2Si Composite
    Moharrami, A.
    Razaghian, A.
    Emamy, M.
    Taghiabadi, R.
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (12):