Formed Workpieces in Industrial Bin Picking

被引：1
|
作者：
Sarna, Matthias [1 ]
Sure, Vamsi [2 ]
Lueder, Arndt [2 ]
Weist, Jens [1 ]
机构：
[1] Volkswagen AG, Wolfsburg, Germany
[2] Otto von Guericke Univ, Magdeburg, Germany
来源：
2022 IEEE 27TH INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES AND FACTORY AUTOMATION (ETFA) | 2022年
关键词：
Industrial Bin Picking; Accuracy; Load Pose Engineering;
D O I：
10.1109/ETFA52439.2022.9921563
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Industrial Bin Picking (IBP) is a central object in factory automation systems. Engineering of IBP applications is still a manual task, since its strongly workpiece related. Especially load poses are defined manually without any guidance. This often leads to establishing weak load poses on formed workpieces because occurring inaccuracy is not known and not considered. This paper aims towards designing a template for IBP applications that allows the engineer to identify and apply load poses that are robust to previously expected inaccuracy on formed workpieces. Therefore, components are analyzed regarding device specific inaccuracy and load deviations are calculated. Obtained data lead to a heat map to be used as a guideline for manual and reliable load pose engineering. This contribution validates that acknowledging inaccuracies in load pose engineering can lead to increasing technical availability for handling formed workpieces in IBP.
引用
收藏
页数：4
相关论文
共 50 条
  • [1] Industrial bin picking: Cycle time and decoupling storage in industrial bin picking applications
    Sarna M.
    Weist J.
    Friedl F.
    Lüder A.
    ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2022, 117 (12): : 856 - 861
  • [2] Balanced Selection in Industrial Bin Picking
    Sarna, Matthias
    Espericueta, Sofia
    Lueder, Arndt
    2022 IEEE 27TH INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES AND FACTORY AUTOMATION (ETFA), 2022,
  • [3] Motion Planning with Motion Primitives for Industrial Bin Picking
    Vonasek, Vojtech
    Vick, Axel
    Saska, Martin
    2017 22ND IEEE INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES AND FACTORY AUTOMATION (ETFA), 2017,
  • [4] Realistic Simulation of Industrial Bin-Picking Systems
    Schyja, Adrian
    Kuhlenkoetter, Bernd
    PROCEEDINGS OF THE 2015 6TH INTERNATIONAL CONFERENCE ON AUTOMATION, ROBOTICS AND APPLICATIONS (ICARA), 2015, : 137 - 142
  • [5] Distributed Motion Planning for Industrial Random Bin Picking
    Vonasek, Vojtech
    Vick, Axel
    Krueger, Joerg
    7TH CIRP CONFERENCE ON ASSEMBLY TECHNOLOGIES AND SYSTEMS (CATS 2018), 2018, 76 : 121 - 126
  • [6] The impact of hand parameter optimization on industrial bin picking
    Domae, Yukiyasu
    Makihara, Koshi
    Hanai, Ryo
    ADVANCED ROBOTICS, 2024,
  • [7] PickingDK: A Framework for Industrial Bin-Picking Applications
    Ojer, Marco
    Lin, Xiao
    Tammaro, Antonio
    Sanchez, Jairo R.
    APPLIED SCIENCES-BASEL, 2022, 12 (18):
  • [8] Learning Efficient Policies for Picking Entangled Wire Harnesses: An Approach to Industrial Bin Picking
    Zhang, Xinyi
    Domae, Yukiyasu
    Wan, Weiwei
    Harada, Kensuke
    IEEE ROBOTICS AND AUTOMATION LETTERS, 2023, 8 (01) : 73 - 80
  • [9] Motion planning efficient trajectories for industrial bin-picking
    Ellekilde, Lars-Peter
    Petersen, Henrik Gordon
    INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, 2013, 32 (9-10): : 991 - 1004
  • [10] AUTOMATED BIN PICKING SYSTEM FOR RANDOMLY LOCATED INDUSTRIAL PARTS
    Martinez, Carlos
    Boca, Remus
    Zhang, Biao
    Chen, Heping
    Nidamarthi, Srinivas
    2015 IEEE INTERNATIONAL CONFERENCE ON TECHNOLOGIES FOR PRACTICAL ROBOT APPLICATIONS (TEPRA), 2015,
12345