Applications of WC-based composites rapid synthesized by consumable electrode in-situ metallurgy to cutting pick

被引：18
作者：
Li, Jiannan [1 ]
Li, Huiqi [1 ]
Wang, Mei [1 ]
Wang, Shufeng [1 ]
Ji, Qiang [1 ]
Li, Min [1 ]
Chi, Jing [1 ]
机构：
[1] Shandong Univ Sci & Technol, Sch Mat Sci & Engn, Qingdao 266590, Peoples R China
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2012年 / 35卷
关键词：
Consumable electrode; In-situ metallurgy; Tungsten carbide; Microstructure; Microhardness; Crystallization mechanism; MECHANICAL-PROPERTIES; ABRASIVE WEAR; CO ALLOYS; MICROSTRUCTURE; MORPHOLOGY; GRAINS; POWDER; BINDER; BULK;
D O I：
10.1016/j.ijrmhm.2012.05.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The composite WpC (WC + W2C) material was prepared by the rapid route of consumable electrode D.C. arc in-situ metallurgy in the blind hole of the cutting pick, which has excellent metallurgical bonding with the substrate. The microstnicture and microhardness of WpC were investigated by XRD, EDS, TEM and microhardness tester. The crystallization mechanism was analyzed. The results show that the microstructure of the sample is uniform, and the hard phases are WC, W2C, Fe3W3C. The average hardness of the alloy is 1290 HV0.2 and the average microhardness of WpC is 2253HV(0.2). The two-dimensional microstructure morphology of WpC is triangluar and rectangular. The largest WpC grains can grow to 70 pm in the molten pool. (c) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：132 / 137
页数：6
相关论文
共 27 条
  • [1] Spark plasma sintering behavior of nanocrystalline WC-10Co cemented carbide powders
    Cha, SI
    Hong, SH
    Kim, BK
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 351 (1-2): : 31 - 38
  • [2] Densification mechanisms in spark plasma sintering of nanocrystalline ceramics
    Chaim, Rachman
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 443 (1-2): : 25 - 32
  • [3] Morphology of WC grains in WC-Co alloys:: Theoretical determination of grain shape
    Christensen, M.
    Wahnstrom, G.
    Lay, S.
    Allibert, C. H.
    [J]. ACTA MATERIALIA, 2007, 55 (05) : 1515 - 1521
  • [4] Evolution of the WC grain shape in WC-Co alloys during sintering: Effect of C content
    Delanoe, Aurelie
    Lay, Sabine
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (01) : 140 - 148
  • [5] Initial stage sintering of binderless tungsten carbide powder under microwave radiation
    Demirskyi, Dmytro
    Ragulya, Andrey
    Agrawal, Dinesh
    [J]. CERAMICS INTERNATIONAL, 2011, 37 (02) : 505 - 512
  • [6] Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting
    Gu, Dongdong
    Meiners, Wilhelm
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (29-30): : 7585 - 7592
  • [7] Gu DD, 2010, ACTA METALL SIN, V46, P761, DOI [10.3724/SP.J.1037.2010.00761, 10.3724/SP.J.1037.2009.00685]
  • [8] Abrasive wear performance and microstructure of laser clad WC/Ni layers
    Huang, SW
    Samandi, M
    Brandt, A
    [J]. WEAR, 2004, 256 (11-12) : 1095 - 1105
  • [9] In situ martensitic phase reinforced Fe-Nb-Ni-Mn ultrafine composite with enhanced mechanical properties
    Kim, T. E.
    Park, J. M.
    Kuehn, Uta
    Eckert, J.
    Kim, W. T.
    Kim, D. H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 531 : 51 - 54
  • [10] Novel ultra-coarse hardmetal grades with reinforced binder for mining and construction
    Konyashin, I
    Schäfer, F
    Cooper, R
    Ries, B
    Mayer, J
    Weirich, T
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2005, 23 (4-6) : 225 - 232
123