Research on Simulation Test Method of CAN Bus Direct Connection

被引：0

作者：

Zhang, Lin-Rui ^{[1
]}

Xiao, Jun ^{[1
]}

Zhang, Xu-Guang ^{[1
]}

Zhang, Wei-Wei ^{[1
]}

机构：

[1] Huayin Ordnance Test Ctr, Huayin, Peoples R China

来源：

INTERNATIONAL CONFERENCE ON MECHANICAL DESIGN AND SIMULATION (MDS 2022) | 2022年 / 12261卷

关键词：

CAN Bus; vehicle; test method and test problem;

D O I：

10.1117/12.2639078

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The test method of CAN bus is studied systematically, and the test problem of CAN bus in vehicle electronic system is solved. Aiming at the problem that there is no comprehensive test method for bus performance at present, the advantages and disadvantages of the existing three methods are compared and analyzed, and a direct connection simulation test method is proposed to comprehensively test CAN bus network performance and single ECU performance. The analysis results show that this method CAN not only test the network performance of CAN bus, but also test and analyze the performance of a single ECU node, which solves the test problem of CAN bus in vehicle electronic system.

引用

页数：6

共 50 条

[21] Research on the connection calculation of direct kinetics simulation and predictor-corrector Quasi-Static method based on RMC code
Jia, Conglong
Wang, Wu
Gou, Yuanhao
Liu, Zhaoyuan
Wang, Kan
ANNALS OF NUCLEAR ENERGY, 2024, 208
[22] Stator ground fault protection of direct generator-bus connection
Nanjing Sino-German Protection and Substation Control Systems Ltd., Nanjing 210003, China
Dianli Xitong Zidonghue, 2007, 15 (74-78):
[23] Research on the CAN bus-based simulation platform of novel redundant flight control system
Tang, ZY
Wang, ZL
Qiu, LH
FIFTH INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION AND CONTROL TECHNOLOGY, 2003, 5253 : 823 - 830
[24] The Research of Fault Diagnosis Method for ECU Controllers in Electric Vehicles Based on CAN Bus
Nan, Jinrui
Huang, Junkui
Chai, Zhi
Lin, Cheng
INDUSTRIAL DESIGN AND MECHANICS POWER II, 2013, 437 : 639 - 642
[25] Research on bolt connection of steel-wood structure based on numerical simulation test
Zheng, Yang
2020 5TH INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY AND ENVIRONMENTAL PROTECTION, 2020, 621
[26] The research and realization for passenger car CAN bus
Zhou Yongqin
Wang Xudong
Zhou Meilan
IFOST 2006: 1ST INTERNATIONAL FORUM ON STRATEGIC TECHNOLOGY, PROCEEDINGS: E-VEHICLE TECHNOLOGY, 2006, : 244 - +
[27] CAN Bus Architecture Design and Test of Combine Harvester
Jiang J.
Sun Y.
Jin X.
Zhou Q.
Mao Z.
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (06): : 93 - 99
[28] In-field Functional Test of CAN Bus Controllers
Cantoro, Riccardo
Sartoni, Sandro
Reorda, Matteo Sonza
2020 IEEE 38TH VLSI TEST SYMPOSIUM (VTS 2020), 2020,
[29] Research on the Direct Current Control Method and Simulation of Flexible HVDC
Wang, Cunping
Sun, Jian
Chang, Qiankun
Jia, Dongqiang
2016 IEEE PES ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2016, : 2023 - 2027
[30] Research on the Simulation Method for Equivalent Stiffness of Bolted Connection Thin Plate Structures
Chen, Zhe
Zhao, Qi-jun
Zhou, Guo-chen
INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING, 2024, 2024

← 1 2 3 4 5 →