Reliability and lifetime evaluation of different wire bonding technologies for high power IGBT modules

IGBT modules for power transmission, industrial and traction applications are operated under severe working conditions and in harsh environments. Therefore, a consequent design, focused on quality, performance and reliability is essential in order to satisfy the high customer requirements. One of the main failure mechanisms encountered in high power IGBT modules subjected to thermal cycles is wire bond lift-off, which is due to the large thermal expansion coefficient mismatch between the aluminum wires and the silicon chips. The paper describes various bonding technologies using different wire materials directly bonded onto chip metallisation as well as the ABB solution where the wire is bonded on a thin molybdenum strain buffer soldered onto the chip. We assess in the present paper the potential of these technologies to enhance module reliability and lifetime through a power cycling test. Failure analysis results are presented and the failure mechanisms related to each technology are explained in detail. (C) 1999 Elsevier Science Ltd. All rights reserved.