The effect of Ce3+ concentration and heat treatment on the luminescence efficiency of YAG phosphor

被引:31
作者
Valiev, Damir [1 ]
Han, Tao [2 ]
Vaganov, Vitaly [1 ]
Stepanov, Sergey [1 ]
机构
[1] Natl Res Tomsk Polytech Univ, Lenin Ave 30, Tomsk 634050, Russia
[2] Chongqing Univ Arts & Sci, Res Inst New Mat Technol, Chongqing 402160, Peoples R China
基金
俄罗斯科学基金会;
关键词
YAG:Ce phosphors; Energy efficiency; Luminescent properties; Heat treatment; Defects; F-TYPE CENTERS; TEMPERATURE; FIELD;
D O I
10.1016/j.jpcs.2018.01.007
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Y3Al5O12 (YAG) phosphor powders doped with Ce3+ at different concentrations (YAG:xCe, x = 0.02, 0.04, 0.06, 0.08, 0.1 wt%) were synthesized by the solid-state reaction method with the addition of BaF2 flux. The effects of cerium concentration and heat treatment on the luminescence efficiency of the YAG:Ce3+ phosphor were investigated. The introduction of Ce3+ ions leads to an increase in luminescent intensity of the YAG phosphor at 560 nm. The band at 530 nm is attributed to Ce3+ ions (optical transitions from the 4f-5d excited state). We assumed that such an increase in the luminescent intensity is due to the ability of Ce3+ to act as a luminescence sensitizer of intrinsic defects in YAG phosphor. The analysis of luminescence decay kinetics in the investigated samples has shown that the decay time in all samples does not differ significantly and equals tau approximate to 60 +/- 3 ns. We showed experimentally that increasing the luminescence intensity has an effect observed with relatively low temperature treatment (T = 400 K). The nature of possible luminescence centers and the effect of low heat treatment on the luminescence properties of the powders are discussed.
引用
收藏
页码:1 / 6
页数:6
相关论文
共 30 条
[1]   Temperature Quenching of Yellow Ce3+ Luminescence in YAG:Ce [J].
Bachmann, Volker ;
Ronda, Cees ;
Meijerink, Andries .
CHEMISTRY OF MATERIALS, 2009, 21 (10) :2077-2084
[2]   Effect of different annealing atmospheres on the structural and luminescence properties of Ce3+-doped YAG phosphors synthesized by sol-gel method [J].
Boukerika, A. ;
Guerbous, L. ;
Belamri, M. .
OPTIK, 2016, 127 (13) :5235-5239
[3]   Escalating opportunities in the field of lighting [J].
Chitnis, Dipti ;
Kalyani, N. Thejo ;
Swart, H. C. ;
Dhoble, S. J. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2016, 64 :727-748
[4]   Effects of annealing temperature on YAG:Ce synthesized by spray-drying method [J].
Han, Tao ;
Cao, Shixiu ;
Zhu, Dachuan ;
Zhao, Cong ;
Ma, Mingxing ;
Tu, Mingjing ;
Zhang, Jin .
OPTIK, 2013, 124 (18) :3539-3541
[5]   Effect of BaF2 powder addition on the synthesis of YAG phosphor by mechanical method [J].
Kanai, Kazuaki ;
Fukui, Yoshifumi ;
Kozawa, Takahiro ;
Kondo, Akira ;
Naito, Makio .
ADVANCED POWDER TECHNOLOGY, 2017, 28 (01) :50-54
[6]   Color tuning of Y3Al5O12: Ce phosphor and their blend for white LEDs [J].
Kottaisamy, M. ;
Thiyagarajan, P. ;
Mishra, J. ;
Rao, M. S. Ramachandra .
MATERIALS RESEARCH BULLETIN, 2008, 43 (07) :1657-1663
[7]   White LEDs with Limit Luminous Efficacy [J].
Lisitsyn, V. M. ;
Lukash, V. S. ;
Stepanov, S. A. ;
Ju Yangyang .
ADVANCED MATERIALS IN TECHNOLOGY AND CONSTRUCTION (AMTC-2015), 2016, 1698
[8]   Heat and fluid flow in high-power LED packaging and applications [J].
Luo, Xiaobing ;
Hu, Run ;
Liu, Sheng ;
Wang, Kai .
PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2016, 56 :1-32
[9]   Scintillation response of Ce-doped or intrinsic scintillating crystals in the range up to 1 MeV [J].
Mares, JA ;
Beitlerova, A ;
Nikl, M ;
Solovieva, N ;
D'Ambrosio, C ;
Blazek, K ;
Maly, P ;
Nejezchleb, K ;
de Notaristefani, F .
RADIATION MEASUREMENTS, 2004, 38 (4-6) :353-357
[10]   Photoluminescent Materials for Solid-State Lighting: State of the Art and Future Challenges [J].
Meyer, Joerg ;
Tappe, Frank .
ADVANCED OPTICAL MATERIALS, 2015, 3 (04) :424-430