The following work is an in-depth investigation of the heat transfer characteristics and cooling effectiveness of a full-scale fully cooled modern high-pressure turbine (HPT) vane as a result of genetic algorithm (GA) optimization, relative to a modern baseline film cooling configuration. Individual designs were evaluated using 3D Reynolds-averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) that modeled film cooling injection using a transpiration boundary condition and evaluated 10 cells from the wall with an isothermal surface condition. 1800 different cooling arrays were assessed for fitness within the optimization where film cooling parameters such as axial and radial hole location, hole size, injection angle, compound angle, and custom-designed row patterns were varied in the design space. The GA optimization terminated with a unique pressure side (PS) cooling array after only 13 generations. The fitness functions prescribed for the problem lowered the PS average near-wall surface temperature, lowered the near-wall maximum temperature, and maintained the level of near-wall average overall effectiveness. Results show how the optimization resulted in redistributed flow from overcooled areas on the vane PS to undercooled areas near the shroud. The optimized cooling array yielded a reduction of average near-wall gas temperature of 2 K, a reduction in the maximum near-wall gas temperature of 3 K, a reduction in maximum heat flux of 2 kW/m(2) and a reduction in pressure loss over the vane, all while maintaining a constant level of surface-averaged overall effectiveness. Methods used to improve pressure side film cooling performance here are promising in terms of eliminating hot spots on individual HPT components in their proper operating environments as well as increasing the potential to use less air for cooling purposes in a gas turbine engine.
