共 57 条
Magnesium-PVC Membrane Sensor Based on 4,5-Bis(Benzoylthio)-1,3-Dithiole-2-Thione
被引:24
作者:
Zamani, Hassan Ali
[1
]
Nezhadali, Azizollah
[2
]
Saghravanian, Malyheh
[2
]
机构:
[1] Islamic Azad Univ, Quchan branch, Dept Appl Chem, Quchan, Iran
[2] Payamenoor Univ, Dept Chem, Mashhad, Iran
关键词:
4;
5-Bis(benzoylthio)-1;
3-dithiole-2-thione;
ion-selective electrode;
magnesium;
potentiometry;
PVC membrane;
sensor;
D O I:
10.1080/00032710802363560
中图分类号:
O65 [分析化学];
学科分类号:
070302 ;
081704 ;
摘要:
This report describes an attempt to develop potentiometric Mg2+ sensors based on a liquid polymeric membrane. Membrane incorporating 4,5-Bis(benzoylthio)-1,3- dithiole-2-thione (Bz2dmit) as ionophore, with composition Bz2 dmit:NaTPB:NB:PVC in the ratio 2.5:2.5:65:30 (w/w), exhibits the best result for potentiometric sensing of Mg2+ ions. The proposed electrode, based on Bz2 dmitwith nitrobenzene (NB) as a solvent mediator in a polyvinyl chloride (PVC) membrane matrix, exhibited a near-Nernstian response to Mg2+ in the concentration range of 1.010-5 to 1.010-1M, with a slope of 29.2mV per decade of activity of Mg2+. The lower limit of detection was 1.010-5M. This sensor showed high selectivity with respect to alkaline, alkaline earth, transition, and heavy metal ions, except for Sr2+, and could be used over a pH range of 3.5-9.0. It can be used for at least 2 mo without considerable divergence in potentials and has a relatively fast response of10s. It was applied successfully as an indicator electrode in potentiometric titration of Mg2+ ions with EDTA.
引用
收藏
页码:2727 / 2742
页数:16
相关论文