Corrosion resistance properties of plasma nitrided Ti-6Al-4V alloy in nitric acid solutions

被引：64

作者：

Fossati, A ^{[1
]}

Borgioli, F ^{[1
]}

Galvanetto, E ^{[1
]}

Bacci, T ^{[1
]}

机构：

[1] Univ Florence, Dip Ingn Civile, I-50139 Florence, Italy

来源：

CORROSION SCIENCE | 2004年 / 46卷 / 04期

关键词：

acid corrosion; polarisation; cyclic voltammetry; titanium nitride; glow discharge nitriding;

D O I：

10.1016/S0010-938X(03)00188-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The corrosion resistance of plasma nitrided Ti-6Al-4V titanium alloy in nitric acid solutions was investigated using polarisation curves, cyclic voltammetry, XRD analysis and surface microhardness. For comparison, untreated alloy samples were tested under the same conditions. While the untreated alloy shows a passive behaviour, the compound layer obtained by glow-discharge nitriding treatment, which is composed of an outer TiN and an inner Ti2N layer, shows a high electrochemical inertia; however, if the polarisation potential is higher than a threshold or the period of immersion in high oxidising acid solution is sufficiently long, then the compound surface layer will be attacked and removed with corrosion rate higher than in the case of the untreated Ti-6Al-4V alloy. The corrosion resistance of Ti2N layer results higher in comparison with that of TiN layer. (C) 2003 Elsevier Ltd. All rights reserved.

引用

页码：917 / 927

页数：11

共 14 条

[1] Characterization of anodic oxide film formed on TiN coating in neutral borate buffer solution [J].

Azumi, K ;

Watanabe, S ;

Seo, M ;

Saeki, I ;

Inokuchi, Y ;

James, P ;

Smyrl, WH .

CORROSION SCIENCE, 1998, 40 (08) :1363-1377

[2] SURFACE ENGINEERING AND CHEMICAL CHARACTERIZATION IN ION-NITRIDED TITANIUM AND TITANIUM-ALLOYS [J].

BACCI, T ;

PRADELLI, G ;

TESI, B ;

GIANOGLIO, C ;

BADINI, C .

JOURNAL OF MATERIALS SCIENCE, 1990, 25 (10) :4309-4314

[3]

Bloyce A, 1994, ASM HDB, V5, P835

[4]

DAMBORENEA J, 1997, SURF COAT TECH, V91, P1

[5] The influence of the residual stresses on the corrosion and wear resistance of nitrided layers produced isothermally and cyclically on Ti-1Al-1Mn titanium alloy under glow discharge conditions [J].

Fleszar, A ;

Mizera, J ;

Fillit, RY ;

Wierzchon, T .

VACUUM, 2000, 57 (04) :405-411

[6] Tribocorrosion behavior of plasma nitrided Ti-6Al-4V alloy in neutral NaCl solution [J].

Galliano, F ;

Galvanetto, E ;

Mischler, S ;

Landolt, D .

SURFACE & COATINGS TECHNOLOGY, 2001, 145 (1-3) :121-131

[7] Corrosion resistance properties of plasma nitrided Ti-6Al-4V alloy in hydrochloric acid solutions [J].

Galvanetto, E ;

Galliano, FP ;

Fossati, A ;

Borgioli, F .

CORROSION SCIENCE, 2002, 44 (07) :1593-1606

[8] CORROSION STABILITY OF TIN PREPARED BY ION-IMPLANTATION AND PVD [J].

HEIDE, N ;

SCHULTZE, JW .

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1993, 80-1 (pt 2) :467-471

[9] Ion nitriding of titanium alpha plus beta alloy for fusion reactor applications [J].

Rolinski, E ;

Sharp, G ;

Cowgill, DF ;

Peterman, DJ .

JOURNAL OF NUCLEAR MATERIALS, 1998, 252 (03) :200-208

[10] MECHANISM OF HIGH-TEMPERATURE PLASMA NITRIDING OF TITANIUM [J].

ROLINSKI, E .

MATERIALS SCIENCE AND ENGINEERING, 1988, 100 :193-199

← 1 2 →