Effects of aluminum on microstructure and compressive properties of Al-Cr-Fe-Ni eutectic multi-component alloys

被引：158
作者：
Chen, X. [1 ]
Qi, J. Q. [1 ]
Sui, Y. W. [1 ]
He, Y. Z. [1 ]
Wei, F. X. [1 ]
Meng, Q. K. [1 ]
Sun, Z. [1 ]
机构：
[1] China Univ Min & Technol, Sch Mat Sci & Engn, Xuzhou 221116, Jiangsu, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2017年 / 681卷
基金：
中国国家自然科学基金;
关键词：
High entropy alloy; Eutectic phase; Microstructure; Mechanical property; HIGH-ENTROPY ALLOY; MECHANICAL-PROPERTIES; BEHAVIOR; ELEMENTS; SYSTEM; HEAT; TI;
D O I：
10.1016/j.msea.2016.11.019
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Al CrFeNi eutectic multi-component alloys were prepared to obtain excellent mechanical properties by double phase strengthening. The X-ray diffraction results showed that the crystal structure were both body-centered cubic and energy-dispersive X-ray spectrometer identified that the two phases are ordered NiAl intermetallic and disordered [Fe, Cr] solid solution. The formation of eutectic structures was introduced by a simplified dynamic model. After mechanical tests, the alloys presented excellent compressive strength and unexpected large deformation. Due to the solid solution and fine-grain strengthening resulted by Al addition, mechanical properties of Al CrFeNi alloys exhibited regularity in some degree. Among all alloys, Al1.3CrFeNi has the highest fracture strength and Al0.9CrFeNi has the most excellent strain. Besides, Al1.2CrFeNi alloy showed a good combination of strength and ductility.
引用
收藏
页码：25 / 31
页数：7
相关论文
共 50 条
  • [21] Phase Prediction, Microstructure and Mechanical Properties of Fe-Mn-Ni-Cr-Al-Si High Entropy Alloys
    Mahmoud, Essam R., I
    Shaharoun, Awaluddin
    Gepreel, Mohamed A.
    Ebied, Saad
    METALS, 2022, 12 (07)
  • [22] The microstructure and properties of Fe55Cr15Ni(30-x)Nbx eutectic high-entropy alloys
    Ye X.
    Cheng Z.
    Liu C.
    Wu X.
    Yu L.
    Liu M.
    Fang D.
    Zhao G.
    Li B.
    Materials Science and Engineering: A, 2022, 841
  • [23] Effect of Gd on microstructure, mechanical properties and damping properties of Fe-Cr-Al alloys
    Liu, Rui
    Sun, Hongliang
    Liu, Xili
    Yan, Weiwen
    Jiang, Xiaosong
    MATERIALS CHARACTERIZATION, 2022, 187
  • [24] Effects of Y and Al additions on the microstructure and tensile properties of CoCr3Fe5Ni high entropy alloys
    Zhang, Jifeng
    Zhu, Heguo
    Xie, Zonghan
    MATERIALS LETTERS, 2021, 299
  • [25] Effects of in situ composite ceramics on the mechanical properties and microstructure of Fe-Cr-Ni alloys
    Chen, Chang
    Shi, Sitao
    Fang, Litong
    Song, Qiang
    Jiu, Shaowu
    Chen, Yanxin
    Yang, Jianfeng
    MATERIALS LETTERS, 2024, 363
  • [26] Effect of Al/Ni Ratio on the Microstructure and Properties of Nickel-Aluminum Bronze Alloys
    Tan, Yinxun
    Xie, Haofeng
    Feng, Xue
    Huang, Shuhui
    Zhang, Wenjing
    Peng, Lijun
    Wang, Wanyu
    Zhao, Yizhi
    MATERIALS, 2024, 17 (06)
  • [27] The microstructure and mechanical properties of novel Fe-rich Fe-Cr-Ni-Ta eutectic multi-principal element alloys
    Li, Jiatong
    Gui, Wanyuan
    Peng, Wenyi
    Cao, Yuxian
    Wang, Xiayan
    Jin, Zi
    Yi, Yang
    Qu, Yuhai
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 7273 - 7283
  • [28] The eutectic compositional space in Al-Cr-Fe-Ni system utilizing the high-throughput Calphad approach
    Talluri, Gopi
    Murty, B. S.
    Maurya, R. S.
    SCRIPTA MATERIALIA, 2024, 249
  • [29] Microstructure and Mechanical Properties of Al–Co–Cr–Fe–Ni Base High Entropy Alloys Obtained Using Powder Metallurgy
    Łukasz Rogal
    Zbigniew Szklarz
    Piotr Bobrowski
    Damian Kalita
    Grzegorz Garzeł
    Anna Tarasek
    Marcin Kot
    Maciej Szlezynger
    Metals and Materials International, 2019, 25 : 930 - 945
  • [30] Microstructure, mechanical properties and wear of Ni-Al-Fe alloys
    Munroe, PR
    George, M
    Baker, I
    Kennedy, FE
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 325 (1-2): : 1 - 8
12345