Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel

被引：44

作者：

Cicek, Adem ^{[2
]}

Kivak, Turgay ^{[1
]}

Samtas, Gurcan ^{[1
]}

机构：

[1] Duzce Univ, Cumayeri Vocat Sch Higher Educ, TR-81700 Cumayeri, Duzce, Turkey

[2] Duzce Univ, Fac Technol, Dept Mfg Engn, Duzce, Turkey

来源：

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2012年 / 58卷 / 03期

关键词：

cryogenic treatment; drilling; surface roughness; roundness error; Taguchi method; MACHINING PARAMETERS; CUTTING PARAMETERS; TOOL WEAR; OPTIMIZATION; DEVIATION; FORCE;

D O I：

10.5545/sv-jme.2011.167

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L-8(2(3)) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel.

引用

页码：165 / 174

页数：10

共 34 条

[1] Analysis of temperature changes on the twist drill under different drilling conditions based on Taguchi method during dry drilling of Al 7075-T651 [J].

Bagci, Eyup ;

Ozcelik, Babur .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 29 (7-8) :629-636

[2] Predicting surface roughness in machining: a review [J].

Benardos, PG ;

Vosniakos, GC .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (08) :833-844

[3]

BOOTHROYD G, 1981, FUNDAMENTALS METAL M

[4] Performance of cryogenically treated HSS tools [J].

da Silva, Flavio J. ;

Franco, Sinesio D. ;

Machado, Alisson R. ;

Ezugwu, Emmanuel O. ;

Souza, Antnio M., Jr. .

WEAR, 2006, 261 (5-6) :674-685

[5]

DANILEVSKY V, 1987, MANUFACTURING ENG

[6] Drilling carbon fiber reinforced plastics manufactured by autoclave - experimental and statistical study [J].

Davim, JP ;

Reis, P .

MATERIALS & DESIGN, 2003, 24 (05) :315-324

[7] Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel [J].

Dhar, NR ;

Kamruzzaman, M ;

Ahmed, M .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (02) :299-304

[8] Effect of deep cryogenic treatment on wear resistance and tool life of M2 HSS drill [J].

Firouzdor, V. ;

Nejati, E. ;

Khomamizadeh, F. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 206 (1-3) :467-472

[9] Statistical analysis of the effects of feed, speed, and wear on hole quality in drilling [J].

Furness, RJ ;

Wu, CL ;

Ulsoy, AG .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1996, 118 (03) :367-375

[10]

Hayajneh NT, 2001, MATER MANUF PROCESS, V16, P147

← 1 2 3 4 →