APPLICATION OF THE TRANSIENT HEATER FOIL TECHNIQUE FOR HEAT TRANSFER AND FILM COOLING EFFECTIVENESS MEASUREMENTS ON A TURBINE VANE ENDWALL

被引:0
|
作者
Jonsson, M. [1 ]
Charbonnier, D. [1 ]
Ott, P. [1 ]
von Wolfersdorf, J.
机构
[1] Ecole Polytech Fed Lausanne, Lab Therm Appl & Turbomachines, CH-1015 Lausanne, Switzerland
关键词
D O I
暂无
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
The paper presents an application of the transient heater foil measurement technique using thermochromic liquid crystals (TLC) to endwall heat transfer and film cooling investigations in a transonic turbine vane cascade. The film cooling configuration consists of an upstream slot, representing the leakage flow area between the interface of the combustor and the turbine, and several rows of cylindrical and fan-shaped holes within the passage. With the transient method chosen, the heat transfer and adiabatic film cooling effectiveness distributions can be obtained simultaneously together with the local heat release within the heater foil. Therefore, the heat release in the foil is not required to be uniform, and the foil can contain discrete holes in the film cooling configuration. Some new developments are presented, which are directed towards improved application of the transient heater foil method for such a complex configuration. This includes tailoring the foil heat-release distribution towards the expected heat transfer patterns, supported by numerical Finite-Element computations and the use of a double-TLC mixture for improved time-wise TLC indications. Additionally, CFD-simulations were used to evaluate the recovery temperature distribution through the vane cascade without film cooling. The experiments were performed in the linear cascade facility at the EPFL-Lausanne. A compressor provides a continuous air flow at near-ambient temperature regulated with heat exchangers. Carbon dioxide is used as coolant in order to achieve engine-representative density ratio between coolant and main flow. Multiple experiments with the same main and coolant flow settings but varying heat flux levels and coolant injection temperatures have been performed and simultaneously analysed using nonlinear regression analysis. The time required between successive experiments to return to homogenous initial conditions, as required by the transient method, has been analysed using an analytical solution for heat-on-heat-off conditions. This permits the model assumption of one-dimensional conduction within a semi-infinite wall with a heat releasing layer on the top. Example results for cases without cooling, with film cooling from rows of discrete holes and the addition of slot film cooling are used to illustrate the benefit of the new approaches for the investigated vane cascade.
引用
收藏
页码:443 / 453
页数:11
相关论文
共 50 条
  • [31] Film-cooled turbine endwall in a transonic flow field: Part II - Heat transfer and film-cooling effectiveness
    Nicklas, M
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2001, 123 (04): : 720 - 729
  • [32] Turbine Blade Endwall Heat Transfer and Film Cooling Performance With Multigap Jets and Film Holes
    Bai, Bo
    Li, Zhiyu
    Hao, Mingyang
    Li, Yuanyuan
    Zhang, Kaiyuan
    Li, Zhigang
    Li, Jun
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2023, 145 (11):
  • [33] A New Test Facility to Investigate Film Cooling on a Nonaxisymmetric Contoured Turbine Endwall-Part II: Heat Transfer and Film Cooling Measurements
    Kneer, Johannes
    Puetz, Franz
    Schulz, Achmed
    Bauer, Hans-Joerg
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2016, 138 (07):
  • [34] Turbine Vane Endwall Film Cooling With Slashface Leakage and Discrete Hole Configuration
    Chowdhury, Nafiz H. K.
    Shiau, Chao-Cheng
    Han, Je-Chin
    Zhang, Luzeng
    Moon, Hee-Koo
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2017, 139 (06):
  • [35] UPSTREAM FILM COOLING ON THE CONTOURED ENDWALL OF A TRANSONIC TURBINE VANE IN AN ANNULAR CASCADE
    Salinas, Daniel A.
    Ullah, Izhar
    Wright, Lesley M.
    Han, Je-Chin
    McClintic, John W.
    Crites, Daniel C.
    Riahi, Ardeshir
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 7B, PT II, 2020,
  • [36] Upstream Film Cooling on the Contoured Endwall of a Transonic Turbine Vane in an Annular Cascade
    Salinas, Daniel A.
    Ullah, Izhar
    Wright, Lesley M.
    Han, Je-Chin
    McClintic, John W.
    Crites, Daniel C.
    Riahi, Ardeshir
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2021, 143 (06):
  • [37] TURBINE VANE ENDWALL FILM COOLING WITH SLASHFACE LEAKAGE AND DISCRETE HOLE CONFIGURATION
    Chowdhury, Nafiz H. K.
    Shiau, Chao-Cheng
    Han, Je-Chin
    Zhang, Luzeng
    Moon, Hee-Koo
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5C, 2016,
  • [38] Endwall film cooling holes design upstream of the leading edge of a turbine vane
    Liu, Jian
    Du, Wei
    Hussain, Safeer
    Xie, Gongnan
    Sunden, Bengt
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2020, 79 (03) : 222 - 245
  • [39] Conjugate heat transfer simulations of pulsed film cooling on an entire turbine vane
    Ke, Zhaoqing
    Wang, Jianhua
    APPLIED THERMAL ENGINEERING, 2016, 109 : 600 - 609
  • [40] APPLICATION OF A CFD-BASED FILM COOLING MODEL TO A GAS TURBINE VANE CASCADE WITH CYLINDRICAL AND SHAPED HOLE ENDWALL FILM COOLING
    Kampe, Tilman Auf Dem
    Voelker, Stefan
    PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 5, PTS A AND B, 2012, : 35 - 44