A simplified fault currents analysis method considering transient of synchronous machine.

被引：9
|
作者：
Kai, T
Takeuchi, N
Funabashi, T
Sasaki, H
机构：
[1] Meidensha Corporation, System Technology Division, Chuo-ku, Tokyo, 103, 36-2, Nihonbashi, Hakozaki-cho
来源：
IEEE TRANSACTIONS ON ENERGY CONVERSION | 1997年 / 12卷 / 03期
关键词：
simplified transient fault currents analysis; synchronous machine fault; transmission line fault; symmetrical-components; EMTP;
D O I：
10.1109/60.629707
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
The transient fault currents for a synchronous machine fault were mathmatically analyzed by using the two-reaction theory, Clarke's components, etc. However, the methods were extremely complicated and the transient fault analysis of synchronous machine with a load was not carried out except for three-phase fault. This paper proposes a simplified fault currents analysis method considering transient of synchronous machine. The method is based on the symmetrical-components. The advantages of the method are that the transient analysis is able to be accomplished more easily than the conventional method when the fault point is a synchronous machine terminal or a transmission line. The accuracy of the method is confirmed by comparing the analysis results with the Electro-Magnetic Transient Program (EMTP) digital simulations.
引用
收藏
页码：225 / 231
页数：7
相关论文
共 50 条
  • [31] A Features Analysis Method of the Transient Fault Voltages and Currents for Flexible DC Grids After DC Line Faults
    Yu X.
    Gu J.
    Zhang X.
    Mao J.
    Xiao L.
    Dianwang Jishu/Power System Technology, 2024, 48 (07): : 2958 - 2966
  • [32] Combined analytical-numerical method for the air gap permeance calculation of the rotor of a salient pole synchronous machine.
    Misir, O.
    Dobbert, F.
    Ponick, B.
    ELEKTROTECHNIK UND INFORMATIONSTECHNIK, 2015, 132 (01): : 33 - 38
  • [33] Loss analysis of permanent magnet synchronous machines by considering circulating currents of armature windings
    Yamazaki, Katsumi
    Yui, Haiyan
    Ohguchi, Hideki
    Shuto, Masao
    ELECTRICAL ENGINEERING IN JAPAN, 2019, 208 (1-2) : 53 - 62
  • [34] Closure to discussion of partitioning of synchronous machine windings for internal fault analysis
    Reichmeider, P.P.
    Querrey, D.
    Gross, C.A.
    Novosel, D.
    Salon, S.
    2001, Institute of Electrical and Electronics Engineers Inc. (16)
  • [35] Experimental investigation of different fault indicators for Synchronous machine failure analysis
    Sahoo, Subrat K.
    Rodriguez, Pedro
    Savinovic, Djordje
    2015 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2015, : 1398 - 1404
  • [36] Transient Analysis and Stability Limits for Synchronous Reluctance Motors Considering Saturation Effects
    Ibrahim, M. N.
    Rashad, E. M.
    Sergeant, P.
    2015 18TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2015, : 1812 - 1816
  • [37] Transient Stability Analysis of Virtual Synchronous Generator Considering Voltage Dynamic Characteristics
    Wei F.
    Zhang H.
    Wang X.
    Zhou J.
    Han J.
    Sha Z.
    Dianwang Jishu/Power System Technology, 2024, 48 (07): : 2910 - 2918
  • [38] Closure to discussion of "Partitioning of synchronous machine windings for internal fault analysis"
    Reichmeider, PP
    Querrey, D
    Gross, CA
    Novosel, D
    Salon, S
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2001, 16 (04) : 384 - 384
  • [39] An Analytical Method of Determining Transient Stability Margin Considering Unbalanced Fault Factors
    Liu, Jiuliang
    Wang, Tong
    Wang, Zengping
    PROCEEDINGS OF 2019 INTERNATIONAL FORUM ON SMART GRID PROTECTION AND CONTROL (PURPLE MOUNTAIN FORUM), VOL I, 2020, 584 : 175 - 186
  • [40] Diagnostic Method for Demagnetization Fault of Elevator Synchronous Traction Machine Based on Informer
    Shao, Peng
    Zheng, Bo
    Tang, Xiaozhou
    Chen, Chao
    Hou, Xuefeng
    INTERNATIONAL JOURNAL OF PATTERN RECOGNITION AND ARTIFICIAL INTELLIGENCE, 2025,
12345