Early decomposition of supersaturated solid solutions of Al-Zn-Mg casting alloys

被引：20

作者：

Dellah, M. ^{[1
,2
]}

Bournane, M. ^{[2
]}

Ragab, Kh A. ^{[2
,3
]}

Sadaoui, Y. ^{[4
]}

Sirenko, A. F. ^{[5
]}

机构：

[1] Univ Tizi Ouzou, Dept Chim, Tizi Ouzou, Algeria

[2] Univ Quebec Chicoutimi, CURAL, Chicoutimi, PQ G7H 2B1, Canada

[3] Cairo Univ, Fac Engn, Dept Met, Cairo, Egypt

[4] Univ Tizi Ouzou, Dept Phys, Tizi Ouzou, Algeria

[5] Univ Kharkov, Fac Phys, Kharkov, Ukraine

来源：

MATERIALS & DESIGN | 2013年 / 50卷

关键词：

Aluminum alloys; Electrical resistance; Hardness; Phase transformation; Small angle X-ray scattering; Solid solution decomposition; 2-STEP AGING TREATMENT; MICROSTRUCTURAL EVOLUTION; MECHANICAL-PROPERTIES; HEAT-TREATMENTS; CU ALLOY; PRECIPITATION; ZONES;

D O I：

10.1016/j.matdes.2013.02.078

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study aimed at investigating the structural, electrical resistivity and hardness changes of aged Al-Zn-Mg alloys. It was observed that the isothermal annealing in temperature range of 25-200 degrees C leads to the following precipitation sequence: Guinier-Preston zones -> eta'-phase -> eta-phase. The significant increase of electrical resistivity (rho) of the considered alloys was associated with the stage of GP zone decomposition. The formation of the intermediate eta'-phase was accompanied with a decrease of electrical resistivity and an increase of hardness. Non-continuous quenching was found to suppress the eta'-phase formation; while elevated quenching rates led to the formation of uniformly distributed fine precipitates in the alloy bulk. (c) 2013 Elsevier Ltd. All rights reserved.

引用

页码：606 / 612

页数：7

共 50 条

[41] Microstructure and Wear Performance of ECAP Processed Cast Al-Zn-Mg Alloys
Manjunath, G. K.
Bhat, K. Udaya
Kumar, G. V. Preetham
Ramesh, M. R.
[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (08) : 1919 - 1931
[42] Characteristics of η′ and η4 precipitates in Ag-modified Al-Zn-Mg alloys
Maloney, SK
Polmear, IJ
Ringer, SP
[J]. ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 631 - 636
[43] Modeling the evolution of the structure and properties of alloys for an Al-Zn-Mg system in ageing
A. N. Solonin
A. Yu. Churyumov
A. V. Mikhailovskaya
M. A. Ryazantseva
M. G. Khomutov
[J]. Russian Journal of Non-Ferrous Metals, 2010, 51 : 471 - 475
[44] Modeling the evolution of the structure and properties of alloys for an Al-Zn-Mg system in ageing
Solonin, A. N.
Churyumov, A. Yu.
Mikhailovskaya, A. V.
Ryazantseva, M. A.
Khomutov, M. G.
[J]. RUSSIAN JOURNAL OF NON-FERROUS METALS, 2010, 51 (06) : 471 - 475
[45] GP-zones in Al-Zn-Mg alloys and their role in artificial aging
Berg, LK
Gjonnes, J
Hansen, V
Li, XZ
Knutson-Wedel, M
Waterloo, G
Schryvers, D
Wallenberg, LR
[J]. ACTA MATERIALIA, 2001, 49 (17) : 3443 - 3451
[46] MICROSTRUCTURAL CHARACTERIZATION AND HEAT TREATMENTS OF DIFFERENT Al-Zn-Mg/Zr ALLOYS
Leo, P.
Cerri, E.
McQueen, H. J.
[J]. TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, 2011, : 339 - 345
[47] Abrasion Wear Resistance of Precipitation-Hardened Al-Zn-Mg Alloy
Rodinger, Tomislav
Luksic, Helena
Coric, Danko
Rede, Vera
[J]. MATERIALS, 2024, 17 (10)
[48] Mechanism for enhanced precipitation strengthening due to the addition of copper to Al-Zn-Mg alloys with high Zn/Mg ratio
Yang, Mengchu
Liu, Shengdan
Zhang, Yong
Tang, Jianguo
Zhang, Mengchao
[J]. MATERIALS & DESIGN, 2023, 234
[49] Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments
Afifi, Mohamed A.
Wang, Ying Chun
Pereira, Pedro Henrique R.
Huang, Yi
Wang, Yangwei
Cheng, Xingwang
Li, Shukui
Langdon, Terence G.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 769 : 631 - 639
[50] Laser powder bed fusion of high solute Al-Zn-Mg alloys: Processing, characterisation and properties
Babu, A. P.
Kairy, S. K.
Huang, A.
Birbilis, N.
[J]. MATERIALS & DESIGN, 2020, 196

← 1 2 3 4 5 →