Wear investigation of selective α-Fe2O3 oxide layers generated on surfaces for dry sheet metal forming

被引：4

作者：

Behrens, Bernd-Arno ^{[1
]}

Yilkiran, Deniz ^{[1
]}

Schoeler, Simon ^{[2
]}

Oezkaya, Fahrettin ^{[1
]}

Huebner, Sven ^{[1
]}

Moehwald, Kai ^{[2
]}

机构：

[1] Leibniz Univ Hannover, Inst Forming Technol & Machines, Univ 2, D-30823 Hannover, Germany

[2] Leibniz Univ Hannover, Inst Mat Sci, Univ 2, D-30823 Hannover, Germany

来源：

PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018 | 2018年 / 15卷

关键词：

Dry metal forming; Oxidization; Oxide layers; alpha-Fe2O3; layers; Sheet metal; Friction coefficient; Wear testing; Wear behavior; Surface quality;

D O I：

10.1016/j.promfg.2018.07.404

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To realize a dry sheet metal forming process, alpha-Fe2O3 oxide layers were investigated regarding their friction characteristics, wear behavior and surface energy depending on different surface qualities of the specimens examined. The oxide layers were generated in a new hybrid batch furnace. The layer generation on all specimens of the tool steel 1.2379 used was performed at a target temperature below the annealing temperature (approximate to 510 degrees C). Friction coefficients were examined with plane strip drawing tests. Wear experiments with oxidized wear specimens with variable surface topographies were carried out up to several thousand strokes per surface condition. (C) 2018 The Authors. Published by Elsevier B.V. Peer-review under responsibility of the scientific committee of the 17th International Conference on Metal Forming.

引用

页码：923 / 930

页数：8

共 10 条

[1]

EDSTROM JO, 1953, J IRON STEEL I, V175, P289

[2] Dry rotary swaging with structured tools [J].

Herrmann, Marius ;

Schenck, Christian ;

Kuhfuss, Bernd .

13TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - DECOUPLING GROWTH FROM RESOURCE USE, 2016, 40 :653-658

[3] ENVIRONMENTAL-HEALTH ASPECTS OF LUBRICANT ADDITIVES [J].

HEWSTONE, RK .

SCIENCE OF THE TOTAL ENVIRONMENT, 1994, 156 (03) :243-254

[4] Macro and micro structuring of deep drawing's tools for lubricant free forming [J].

Mousavi, Ali ;

Schomaecker, Michael ;

Brosius, Alexander .

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 :1890-1895

[5]

Scholer S., 2018, OAJ FMT, V4, P13

[6]

Singer Markus, 2015, Key Engineering Materials, V651-653, P480, DOI 10.4028/www.scientific.net/KEM.651-653.480

[7] Dry Metal Forming: Definition, Chances and Challenges [J].

Vollertsen, Frank ;

Schmidt, Florian .

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2014, 1 (01) :59-62

[8]

Wulff D., 2015, DRY MET FORM OAJ FMT, V1, P72

[9] Wear behaviour of thermally oxidised tool surfaces as low-friction separation layers for dry sheet metal forming [J].

Yilkiran, D. ;

Wulff, D. ;

Almohallami, A. ;

Oezkaya, F. ;

Bouguecha, A. ;

Huebner, S. ;

Moehwald, K. ;

Maier, H. J. ;

Behrens, B. -A. .

WEAR, 2017, 376 :1789-1803

[10]

Yilkiran D., 2016, P 12 INT C COAT MAN, P179

← 1 →