Design of search space for improving the steady current control performance of PMSM current control system based on model predictive control

被引:6
作者
Shimaoka, Masahiro [1 ]
Doki, Shinji [2 ]
机构
[1] Nagoya Univ, Grad Sch Engn, Dept Informat & Commun Engn, Nagoya, Aichi, Japan
[2] Nagoya Univ, Nagoya, Aichi, Japan
关键词
PMSM; model predictive control; current vector control; design of search space; improvement of steady current control performance;
D O I
10.1002/eej.23303
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper proposes a method to design the search space of Model Predictive Control (MPC) for improving the steady current control performance of Permanent Magnet Synchronous Motor (PMSM) current control system. A current control system based on MPC predicts the future current behaviors for considerable input voltage and determines the optimum input voltage by evaluating these behaviors. However, the basic MPC has inferior steady current control performance depending on the operating points. This is because the search space of basic MPC represented by voltage vectors is not suitable appropriate for PMSM current control. To overcome this problem, we consider difference of search space of basic MPC and current vector control with a modulator such as Pulse Width Modulation (PWM) or Space Vector Modulation (SVM) and clarify the necessary search space for improving the steady current control performance. Then, we propose a design method for the search space, and through experimentation, we show that proposed design method can improve the steady current control performance.
引用
收藏
页数:15
相关论文
共 25 条
[1]   Torque-Ripple Minimization and Fast Dynamic Scheme for Torque Predictive Control of Permanent-Magnet Synchronous Motors [J].
Cho, Yongsoo ;
Lee, Kyo-Beum ;
Song, Joong-Ho ;
Lee, Young Il .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2015, 30 (04) :2182-2190
[2]  
Cimini G, 2015, 2015 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT), P2308, DOI 10.1109/ICIT.2015.7125438
[3]  
Doki, 2015, P JIASC, V2015
[4]  
Doki S., 2016, P JIASC, V2016
[5]   MPC Implementation of a Quasi-Time-Optimal Speed Control for a PMSM Drive, With Inner Modulated-FS-MPC Torque Control [J].
Fuentes, Esteban ;
Silva, Cesar A. ;
Kennel, Ralph M. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2016, 63 (06) :3897-3905
[6]  
Hara S., 2016, Trans. Society of Automotive Engineers of Japan, V47, P1085
[7]   Improved PMSM Model Considering Flux Characteristics for Model Predictive-Based Current Control [J].
Imura, Akihiro ;
Takahashi, Tomoya ;
Fujitsuna, Masami ;
Zanma, Tadanao ;
Doki, Shinji .
IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 2015, 10 (01) :92-100
[8]  
Kawai Yasunori, 2007, Transactions of the Institute of Electrical Engineers of Japan, Part C, V127, P748, DOI 10.1541/ieejeiss.127.748
[9]  
Leuer M, 2014, INT CONF POW ELECTR, P346, DOI 10.1109/IPEC.2014.6869605
[10]  
Li C., 2017, 20 INT C EL MACH SYS