A comparative study on liquid metal embrittlement susceptibility of three FeCrAl ferritic alloys in contact with liquid lead-bismuth eutectic at 350?C

被引：29
作者：
Gong, Xing [1 ]
Chen, Jiajun [1 ]
Xiang, Congying [2 ]
Yu, Zhiyang [2 ]
Gong, Haoran [3 ]
Yin, Yuan [1 ]
机构：
[1] Shenzhen Univ, Coll Phys & Optoelect Engn, Adv Nucl Energy Res Team, Shenzhen 518060, Peoples R China
[2] Fuzhou Univ, Coll Chem, State Key Lab Photocatalysis Energy & Environm, Fuzhou 350002, Peoples R China
[3] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
来源：
CORROSION SCIENCE | 2021年 / 183卷
基金：
中国国家自然科学基金;
关键词：
FeCrAl; LBE; LME; Cleavage; Wetting; 550; DEGREES-C; DISSOLUTION CORROSION; T91; STEEL; AUSTENITIC STEELS; STAINLESS-STEELS; OXIDE SCALES; FLOWING LBE; OXYGEN; PB; 316L;
D O I：
10.1016/j.corsci.2021.109346
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Liquid metal embrittlement (LME) susceptibility of three FeCrAl alloys (i.e., Fe10Cr4Al, Fe15Cr4Al and Fe10Cr6Al, wt%) was tested in oxygen-saturated and -depleted liquid lead-bismuth eutectic (LBE) at 350 ?C using slow strain rate tensile tests. The results show that all three alloys are very susceptible to LME, manifested by a severe reduction in total elongation to failure and prevailing cleavage on fracture surfaces. LME is delayed in oxygen-saturated LBE, due to a dewetting effect of surface oxides. In three alloys, Fe10Cr6Al is most susceptible to LME, especially in presence of oxygen-depleted LBE.
引用
收藏
页数：15
相关论文
共 50 条
  • [31] Influence of liquid lead and lead-bismuth eutectic on tensile, fatigue and creep properties of ferritic/martensitic and austenitic steels for transmutation systems
    Gorse, D.
    Auger, T.
    Vogt, J. -B.
    Serre, I.
    Weisenburger, A.
    Gessi, A.
    Agostini, P.
    Fazio, C.
    Hojna, A.
    Di Gabriele, F.
    Van den Bosch, J.
    Coen, G.
    Almazouzi, A.
    Serrano, M.
    JOURNAL OF NUCLEAR MATERIALS, 2011, 415 (03) : 284 - 292
  • [32] Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 celcius
    Chen, Qingsong
    Zhai, Lihong
    Chen, Yaxuan
    Liu, Hao
    Yang, Jijun
    Zhang, Feifei
    NUCLEAR MATERIALS AND ENERGY, 2023, 35
  • [33] Evaluating the dissolution corrosion resistance of Hastelloy exposed to liquid lead-bismuth eutectic at 500°C
    Shi, Jiajian
    Huang, Yuji
    Chen, Yingxue
    Yuan, Rui
    Zhang, Lijun
    Zhang, Feifei
    Meng, Fanqiang
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2024, 75 (06): : 796 - 804
  • [34] Insights into the fatigue damage mechanism of T91 steel in liquid lead-bismuth eutectic at 150-550 ° C
    Xue, Baoquan
    Wang, Wen
    Tan, Jibo
    Kuang, Wenjun
    Wu, Xinqiang
    Zhang, Ziyu
    Wang, Xiang
    Ke, Wei
    CORROSION SCIENCE, 2024, 232
  • [35] Research Advance on Liquid Lead-Bismuth Eutectic Corrosion Resistant Si Enhanced Ferritic/Martensitic and Austenitic Stainless Steels
    Wu Xinqiang
    Rong Lijian
    Tan Jibo
    Chen Shenghu
    Hu Xiaofeng
    Zhang Yangpeng
    Zhang Ziyu
    ACTA METALLURGICA SINICA, 2023, 59 (04) : 502 - 512
  • [36] Superior corrosion resistance of a slurry FeAl coating on 316LN stainless steel in 550 °C liquid lead-bismuth eutectic
    Wang, Wen
    Zhu, Zhaoguang
    Yang, Liujie
    Lu, Jintao
    Huang, Jinyang
    Tan, Jibo
    Kuang, Wenjun
    CORROSION SCIENCE, 2024, 227
  • [37] Study of the thermal release behaviour of mercury and thallium from liquid eutectic lead-bismuth alloy
    Neuhausen, J
    Eichler, B
    RADIOCHIMICA ACTA, 2005, 93 (03) : 155 - 158
  • [38] Temperature effect in the maximum propagation rate of a liquid metal filled crack: The T91 martensitic steel/Lead-Bismuth Eutectic system
    Hadjem-Hamouche, Z.
    Auger, T.
    Guillot, I.
    CORROSION SCIENCE, 2009, 51 (11) : 2580 - 2587
  • [39] Effect of deformation twinning on dissolution corrosion of 316L stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C
    Klok, Oksana
    Lambrinou, Konstantina
    Gavrilov, Serguei
    Stergar, Erich
    Lim, Jun
    Van der Donck, Tom
    Van Renterghem, Wouter
    De Graeve, Iris
    JOURNAL OF NUCLEAR MATERIALS, 2018, 510 : 556 - 567
  • [40] Dissolution corrosion of 316L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LSE) at 500 °C
    Lambrinou, Konstantina
    Charalampopoulou, Evangelia
    Van der Donck, Tom
    Delville, Remi
    Schryvers, Dominique
    JOURNAL OF NUCLEAR MATERIALS, 2017, 490 : 9 - 27
12345