A comparative study on liquid metal embrittlement susceptibility of three FeCrAl ferritic alloys in contact with liquid lead-bismuth eutectic at 350?C

被引：29
|
作者：
Gong, Xing [1 ]
Chen, Jiajun [1 ]
Xiang, Congying [2 ]
Yu, Zhiyang [2 ]
Gong, Haoran [3 ]
Yin, Yuan [1 ]
机构：
[1] Shenzhen Univ, Coll Phys & Optoelect Engn, Adv Nucl Energy Res Team, Shenzhen 518060, Peoples R China
[2] Fuzhou Univ, Coll Chem, State Key Lab Photocatalysis Energy & Environm, Fuzhou 350002, Peoples R China
[3] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
来源：
CORROSION SCIENCE | 2021年 / 183卷
基金：
中国国家自然科学基金;
关键词：
FeCrAl; LBE; LME; Cleavage; Wetting; 550; DEGREES-C; DISSOLUTION CORROSION; T91; STEEL; AUSTENITIC STEELS; STAINLESS-STEELS; OXIDE SCALES; FLOWING LBE; OXYGEN; PB; 316L;
D O I：
10.1016/j.corsci.2021.109346
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Liquid metal embrittlement (LME) susceptibility of three FeCrAl alloys (i.e., Fe10Cr4Al, Fe15Cr4Al and Fe10Cr6Al, wt%) was tested in oxygen-saturated and -depleted liquid lead-bismuth eutectic (LBE) at 350 ?C using slow strain rate tensile tests. The results show that all three alloys are very susceptible to LME, manifested by a severe reduction in total elongation to failure and prevailing cleavage on fracture surfaces. LME is delayed in oxygen-saturated LBE, due to a dewetting effect of surface oxides. In three alloys, Fe10Cr6Al is most susceptible to LME, especially in presence of oxygen-depleted LBE.
引用
收藏
页数：15
相关论文
共 50 条
  • [21] Corrosion behavior of ZrN coated ferritic/martensitic steel in liquid lead-bismuth eutectic
    Zhu, Changda
    Liu, Guiliang
    Yu, Baohua
    Chen, Qingsong
    Zhang, Wei
    Yang, Jian
    Deng, Jiuguo
    Zhong, Yilong
    Liu, Ning
    Yang, Jijun
    NUCLEAR MATERIALS AND ENERGY, 2023, 36
  • [22] Fracture toughness assessment of ferritic-martensitic steel in liquid lead-bismuth eutectic
    Van den Bosch, J.
    Coen, G.
    Almazouzi, A.
    Degrieck, J.
    JOURNAL OF NUCLEAR MATERIALS, 2009, 385 (02) : 250 - 257
  • [23] Corrosion behavior of Cr coating on ferritic/martensitic steels in liquid lead-bismuth eutectic at 600 °C and 700 °C
    Wang, Li
    Liao, Qing
    Zhang, Jintao
    Liu, Sijie
    Gan, Shuyun
    Wang, Renda
    Ge, Fangfang
    Chen, Liming
    Xu, Shuai
    Polcar, T.
    Daghbouj, N.
    Li, Bingsheng
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 3958 - 3966
  • [24] Liquid metal embrittlement of a dual-phase Al0.7CoCrFeNi high-entropy alloy exposed to oxygen-saturated lead-bismuth eutectic
    Gong, Xing
    Xiang, Congying
    Auger, Thierry
    Chen, Jiajun
    Liang, Xiaocong
    Yu, Zhiyang
    Short, Michael P.
    Song, Min
    Yin, Yuan
    SCRIPTA MATERIALIA, 2021, 194
  • [25] Influence of Si addition on the corrosion behavior of 9Cr ferritic/martensitic steel in static liquid lead-bismuth eutectic
    Liu, Hao
    Chen, Qingsong
    Li, Qingyu
    Li, Yongchun
    Yang, Jijun
    MATERIALS RESEARCH EXPRESS, 2025, 12 (03)
  • [26] Effect of liquid metal embrittlement on low cycle fatigue properties and fatigue crack propagation behavior of a modified 9Cr-1Mo ferritic-martensitic steel in an oxygen-controlled lead-bismuth eutectic environment at 350 °C
    Gong, Xing
    Marmy, Pierre
    Qin, Ling
    Verlinden, Bert
    Wevers, Martine
    Seefeldt, Marc
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 618 : 406 - 415
  • [27] Corrosion behavior of 9Cr-Si heat resistant steel deposited metal in liquid lead-bismuth eutectic at 550 °C
    Liu, Chen
    Wei, Shitong
    Lu, Shanping
    CORROSION SCIENCE, 2023, 215
  • [28] Low cycle fatigue behavior of a modified 9Cr-1Mo ferritic-martensitic steel in lead-bismuth eutectic at 350 °C - Effects of oxygen concentration in the liquid metal and strain rate
    Gong, Xing
    Marmy, Pierre
    Verlinden, Bert
    Wevers, Martine
    Seefeldt, Marc
    CORROSION SCIENCE, 2015, 94 : 377 - 391
  • [29] Crevice corrosion behavior of 316L austenitic steel in static liquid lead-bismuth eutectic at 550°C
    Huang, Yuji
    Meng, Fanqiang
    Shi, Jiajian
    Zhang, Lijun
    Yuan, Rui
    Chen, Yingxue
    Zhang, Feifei
    JOURNAL OF NUCLEAR MATERIALS, 2025, 603
  • [30] Corrosion behavior of T91 steel in liquid lead-bismuth eutectic at 550 °C: Effects of exposure time and dissolved oxygen concentration
    Zhu, Zhaoguang
    Zhang, Qiang
    Tan, Jibo
    Wu, Xinqiang
    Ma, Haibin
    Zhang, Ziyu
    Ren, Qisen
    Han, En-Hou
    Wang, Xiang
    CORROSION SCIENCE, 2022, 204
12345