The analysis of the steel deoxidation process in a vacuum installation

被引：2

作者：

Ardelean, E. ^{[1
]}

Socalici, A. ^{[1
]}

Ardelean, M. ^{[1
]}

Serban, S. ^{[1
]}

Vatasescu, M. ^{[2
]}

机构：

[1] Politehn Univ Timisoara, Engn & Management Dept, Revolutiei Str 5, Hunedoara 331128, Romania

[2] SC St Michele SRL, G Enescu Str 1 Bis, Hunedoara 331125, Romania

来源：

INTERNATIONAL CONFERENCE ON APPLIED SCIENCES (ICAS2016) | 2017年 / 163卷

关键词：

OPTIMIZATION;

D O I：

10.1088/1757-899X/163/1/012025

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The oxygen is an element which has adversely affect to the steel quality because it causes embrittlement at high temperature, evidenced by the increased susceptibility on overheating and the appearance of cracks during deformation plastic, respectively by determining the appearance of the gas holes during castings solidification of products. As a result from a technological point of view, in industrial practice shall be adopted a series of measures that are intended to ensure a low oxygen content (recommended below 40ppm). The paper presents a few practical data taken from the industry in relation to the manner in which it is influenced the content of oxygen according with the vacuum parameters and the steel temperature. The resulting correlations, presented in both form graphical and analytical, are a real benefit to the industry, so can be determined a parameter depending on the other two.

引用

页数：10

共 13 条

[1] Contribution on the influence of steel ladle processing (LF) upon the nitrogen removal rate [J].

Ardelean, E. ;

Ardelean, M. ;

Josan, A. ;

Pinca-Bretotean, C. .

INTERNATIONAL CONFERENCE ON APPLIED SCIENCES (ICAS2013), 2014, 57

[2] Steel cleanliness and environmental metallurgy [J].

Birat, Jean-Pierre .

METALLURGICAL RESEARCH & TECHNOLOGY, 2016, 113 (02) :201-U27

[3] IMPROVING STEEL DEOXIDATION TECHNOLOGY WITH THE USE OF DATA ON THE ACTIVITY OF DISSOLVED OXYGEN [J].

Chichkarev, E. A. .

METALLURGIST, 2009, 53 (9-10) :607-612

[4] Process-time Optimization of Vacuum Degassing Using a Genetic Alloy Design Approach [J].

Dilner, David ;

Lu, Qi ;

Mao, Huahai ;

Xu, Wei ;

van der Zwaag, Sybrand ;

Selleby, Malin .

MATERIALS, 2014, 7 (12) :7997-8011

[5] Researches on the influence of the slags formed in the installations on the hydrogen removal efficiency [J].

Dragoi, F. ;

Socalici, A. ;

Ardelean, E. ;

Popa, E. ;

Heput, T. .

REVISTA DE METALURGIA, 2011, 47 (06) :477-484

[6]

Ghe Nica, 2003, TECHNOLOGY IMPROVE S

[7]

Heput T, 2010, METAL INT, V15, P22

[8]

Livshits D A, 2011, RUSS METALL+, V12, P1110

[9] Optimisation of stirring conditions during vacuum degassing in order to lower inclusion content in tool steel [J].

Malmberg, K. ;

Nzotta, M. ;

Karasev, A. ;

Jonsson, P. G. .

IRONMAKING & STEELMAKING, 2013, 40 (03) :231-237

[10]

Protasov A V, 2010, CIS IRON STEEL REV, V1, P15

← 1 2 →