A comparative study of the structure and the corrosion behavior of zinc coatings deposited with various methods

被引：35

作者：

Vourlias, G.

Pistofidis, N.

Chaliampalias, D.

Pavlidou, E.

Patsalas, P.

Stergioudis, G. ^{[1
]}

Tsipas, D.

Polychroniadis, E. K.

机构：

[1] Aristotle Univ Thessaloniki, Dept Phys, GR-54124 Thessaloniki, Greece

[2] Univ Ioannina, Dept Mat Sci & Engn, GR-45110 Ioannina, Greece

[3] Aristotle Univ Thessaloniki, Dept Mech Engn, GR-54124 Thessaloniki, Greece

来源：

SURFACE & COATINGS TECHNOLOGY | 2006年 / 200卷 / 22-23期

关键词：

surfaces and interfaces; coating materials; metals and alloys; scanning electron microscopy; X-ray diffiraction;

D O I：

10.1016/j.surfcoat.2005.11.039

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The structure and the corrosion performance of Zn coatings formed by pack cementation and fluidized bed reactor at 250, 350, 380 and 400 degrees C have been studied. From this investigation, it turned out that these coatings are composed of two layers referring to gamma-FeIIZn40 and delta-FeZn10 phases of the Fe-Zn phase diagram. Furthermore, in the pack coatings, inclusions were detected, which are composed of Fe and Zn at almost equal concentrations. Concerning the corrosion, a mechanism of stress corrosion has been identified. The corrosion performance of the studied coatings is similar to that of the hot-dip galvanized coatings, although the deposition method is different. (c) 2005 Elsevier B.V. All rights reserved.

引用

页码：6594 / 6600

页数：7

共 22 条

[1]

*AM GALV ASS, 2000, GALV CORR PROT SPEC

[2]

[Anonymous], BASIC CORROSION TECH

[3] Improvement of high temperature oxidation and corrosion resistance of superalloy IN-738LC by pack cementation [J].