Microstructure and Mechanical Properties of Magnesium Alloy Prepared by Repetitive Upsetting

被引：1
作者：
Guo, Wei [1 ]
Wang, Qudong [1 ]
Liu, Manping [1 ]
Liu, Xintao [1 ]
Zhou, Hao [1 ]
机构：
[1] Shanghai Jiao Tong Univ, Natl Engn Res Ctr Light Alloy Net Forming, Shanghai 200240, Peoples R China
来源：
THERMEC 2011, PTS 1-4 | 2012年 / 706-709卷
关键词：
Repetitive upsetting; AZ31; alloy; Refining grain; Mechanical properties; CYCLIC EXTRUSION COMPRESSION; SEVERE PLASTIC-DEFORMATION; GRAIN-REFINEMENT; MG ALLOY; PRINCIPLES; ALUMINUM;
D O I：
10.4028/www.scientific.net/MSF.706-709.1261
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Repetitive upsetting (RU) was applied to a commercial AZ31 Mg alloy. The samples were processed at temperatures of 230 degrees C, 250 degrees C and 300 degrees C up to 3 passes. Effects of processing temperature on the microstructure and mechanical properties were investigated. The results indicate that the microstructure was effectively refined by RU and an average grain size of similar to 1.9 mu m was obtained at 250 degrees C. Increasing the temperature resulted in larger mean grain size and higher microstructural homogeneity. Both the strength and hardness were significantly improved. It was also found that increasing the processing temperature led to increase in the strength but decrease in the ductility. The sample after RU 3 passes at 230 degrees C had tensile strength of 330 MPa compared with 173 MPa prior to the processing.
引用
收藏
页码：1261 / 1266
页数：6
相关论文
共 12 条
  • [1] Trends in the development of new Mg alloys
    Bamberger, M.
    Dehm, G.
    [J]. ANNUAL REVIEW OF MATERIALS RESEARCH, 2008, 38 : 505 - 533
  • [2] Network-shaped fine-grained microstructure and high ductility of magnesium alloy fabricated by cyclic extrusion compression
    Chen, Y. J.
    Wang, Q. D.
    Roven, H. J.
    Liu, M. P.
    Karlsen, M.
    Yu, Y. D.
    Hjelen, J.
    [J]. SCRIPTA MATERIALIA, 2008, 58 (04) : 311 - 314
  • [3] Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP
    Figueiredo, Roberto B.
    Langdon, Terence G.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 501 (1-2): : 105 - 114
  • [4] Grain refinement in as-cast AZ80 Mg alloy under large strain deformation
    Guo, Q.
    Yan, H. G.
    Chen, Z. H.
    Zhang, H.
    [J]. MATERIALS CHARACTERIZATION, 2007, 58 (02) : 162 - 167
  • [5] Microstructure of Al-Si-Mg alloy processed by rotary-die equal channel angular pressing
    Kim, JC
    Nishida, Y
    Arima, H
    Ando, T
    [J]. MATERIALS LETTERS, 2003, 57 (11) : 1689 - 1695
  • [6] Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing
    Liu, Manping
    Roven, Hans J.
    Yu, Yingda
    Werenskiold, Jens C.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 (1-2 C): : 59 - 63
  • [7] Deformation twins in ultrafine grained commercial aluminum
    Liu, Manping
    Roven, Hans J.
    Yu, Yingda
    [J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2007, 98 (03) : 184 - 190
  • [8] Microstructure and mechanical properties of Mg-10Gd-2Y-0.5Zr alloy recycled by cyclic extrusion compression
    Peng, T.
    Wang, Q. D.
    Lin, J. B.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 516 (1-2): : 23 - 30
  • [9] T-shaped equi-channel angular pressing of Pb-Sn eutectic and its tensile properties
    Rao, V. Srinivas
    Kashyap, B. P.
    Prabhu, N.
    Hodgson, P. D.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486 (1-2): : 341 - 349
  • [10] Principles of equal-channel angular pressing as a processing tool for grain refinement
    Valiev, Ruslan Z.
    Langdon, Terence G.
    [J]. PROGRESS IN MATERIALS SCIENCE, 2006, 51 (07) : 881 - 981
12