Fatigue assessment of welded thin sheets with the notch stress approach - Proposal for recommendations

被引：25

作者：

Baumgartner, Joerg ^{[1
]}

Hobbacher, Adolf F. ^{[2
]}

Rennert, Roland ^{[3
]}

机构：

[1] Fraunhofer Inst Struct Durabil & Syst Reliabil LB, Darmstadt, Germany

[2] Jade Hsch, Wilhelmshaven, Germany

[3] IMA Mat Forsch & Anwendungstech GmbH, Dresden, Germany

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2020年 / 140卷

关键词：

Welded joints; Fatigue assessment; Notch stress approach; Reference radii; Slope and knee point; JOINTS; STRENGTH; DESIGN; COMPONENTS; THICKNESS; ALLOY; RADII;

D O I：

10.1016/j.ijfatigue.2020.105844

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The fatigue behavior and assessment of welded thin joints shows some special characteristics compared to thick joints. The slope of the S-N curve is shallower and the assessment has to be performed with smaller reference radii, if notch stresses are used. Up to now, many publications are available that address one or the other issue. However, a complete assessment strategy is lacking. In this paper, the main results from the literature are gathered, further evaluations are performed and two assessment approaches are described. The notch stress approach using reference radii and the effective stress approach. For both, FAT-classes are recommended.

引用

页数：14

共 103 条

[71] Application of different concepts for fatigue design of welded joints in rotating components in mechanical engineering [J].

Pyttel, Brita ;

Grawenhof, Peter ;

Berger, Christina .

INTERNATIONAL JOURNAL OF FATIGUE, 2012, 34 (01) :35-46

[72]

Radaj D., 1990, DESIGN ANAL FATIGUE

[73]

Schliebner R., 2005, THESIS

[74]

Schonborn S., 2014, 16602 AIF DVS FORSCH

[75]

Shams E., 2017, THESIS

[76]

Siegele D, 2013, FKM GUIDELINE ANAL S

[77] Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety [J].

Sonsino, C. M. .

INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (12) :2246-2258

[78] A CONSIDERATION OF ALLOWABLE EQUIVALENT STRESSES FOR FATIGUE DESIGN OF WELDED JOINTS ACCORDING TO THE NOTCH STRESS CONCEPT WITH THE REFERENCE RADII rref=1.00 AND 0.05 mm [J].

Sonsino, C. M. .

WELDING IN THE WORLD, 2009, 53 (3-4) :R64-R75

[79]

Sonsino C.M., 1997, 16024 EUR COMM EUR C

[80] S-N LINES FOR WELDED THIN JOINTS - SUGGESTED SLOPES AND FAT VALUES FOR APPLYING THE NOTCH STRESS CONCEPT WITH VARIOUS REFERENCE RADII [J].

Sonsino, Cetin M. ;

Bruder, Thomas ;

Baumgartner, Joerg .

WELDING IN THE WORLD, 2010, 54 (11-12) :R375-R392

← 2 3 4 5 6 7 8 9 10 11 →