Preparation and thermal properties of oil-based nanofluid from multi-walled carbon nanotubes and engine oil as nano-lubricant

被引:202
作者
Ettefaghi, Ehsan-o-Ilah [1 ]
Ahmadi, Hojjat [1 ]
Rashidi, Alimorad [2 ]
Nouralishahi, Amideddin [3 ]
Mohtasebi, Seyed Saeid [1 ]
机构
[1] Univ Tehran, Dept Mech Engn Agr Machinery, Karaj, Iran
[2] RIPI, Nanotechnol Res Ctr, Tehran, Iran
[3] Univ Tehran, Sch Chem Engn, Catalysis & Nanostruct Mat Res Lab, Tehran, Iran
关键词
Engine oil; Multi-walled carbon nanotubes; Viscosity; Thermal conductivity; Pour point; Flash point; TRIBOLOGICAL PROPERTIES; FRICTION PERFORMANCE; NANOPARTICLES; CONDUCTIVITY; FUNCTIONALIZATION; BEHAVIORS;
D O I
10.1016/j.icheatmasstransfer.2013.05.003
中图分类号
O414.1 [热力学];
学科分类号
摘要
Nowadays, different materials with various nanostructures are used as additives for improving properties of lubricants. In this research, the effect of multi-walled carbon nanotubes (MWCNTs) in different concentrations on some of the properties of engine oils was studied. Viscosity, pour point, flash point and thermal conductivity as four quality parameters, which are effective in functionality of engine oil, were also studied. Among the different methods, which have been applied for dispersing nanotubes inside the base oil, the functionalization method for carbon nanotubes and using planetary ball mill have been determined as the best methods for stabilization of nanotubes inside the SAE 20 W50 engine oil. According to the obtained results, thermal conductivity and flash point of nano-lubricants with 0.1 wt% improved by 13.2% and 6.7%, respectively, with respect to the base oil. (c) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:142 / 147
页数:6
相关论文
共 33 条
[1]   Rheological Behaviors of Nanofluids Containing Multi-Walled Carbon Nanotube [J].
Chen, Lifei ;
Xie, Huaqing ;
Yu, Wei ;
Li, Yang .
JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY, 2011, 32 (04) :550-554
[2]   Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes [J].
Chen, Xianhong ;
Wang, Jianfeng ;
Lin, Ming ;
Zhong, Wenbin ;
Feng, Tao ;
Chen, Xiaohua ;
Chen, Jianghua ;
Xue, Feng .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 492 (1-2) :236-242
[3]   Preparation and heat transfer properties of nanoparticle-in-transformer oil dispersions as advanced energy-efficient coolants [J].
Choi, C. ;
Yoo, H. S. ;
Oh, J. M. .
CURRENT APPLIED PHYSICS, 2008, 8 (06) :710-712
[4]   Tribological behavior of copper nanoparticles as additives in oil [J].
Choi, Y. ;
Lee, C. ;
Hwang, Y. ;
Park, M. ;
Lee, J. ;
Choi, C. ;
Jung, M. .
CURRENT APPLIED PHYSICS, 2009, 9 (02) :E124-E127
[5]  
Decagon Devices Company, KD2 PRO
[6]  
Ferguson C. R., 2001, INTERNAL COMBUSTION, P134
[7]   Preparation and characterisation of single-walled carbon nanotubes functionalised with amines [J].
Gabriel, G. ;
Sauthier, G. ;
Fraxedas, J. ;
Moreno-Manas, M. ;
Martinez, M. T. ;
Miravitlles, C. ;
Casabo, J. .
CARBON, 2006, 44 (10) :1891-1897
[8]   Enhanced thermal conductivity of ethylene glycol with single-walled carbon nanotube inclusions [J].
Harish, Sivasankaran ;
Ishikawa, Kei ;
Einarsson, Erik ;
Aikawa, Shinya ;
Chiashi, Shohei ;
Shiomi, Junichiro ;
Maruyama, Shigeo .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (13-14) :3885-3890
[9]   Effect of ozonolysis on the pore structure, surface chemistry, and bundling of single-walled carbon nanotubes [J].
Hemraj-Benny, Tirandal ;
Bandosz, Teresa J. ;
Wong, Stanislaus S. .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2008, 317 (02) :375-382
[10]   Thermal conductivity and lubrication characteristics of nanofluids [J].
Hwang, Y. ;
Park, H. S. ;
Lee, J. K. ;
Jung, W. H. .
CURRENT APPLIED PHYSICS, 2006, 6 :E67-E71