Characterization of AISI 4340 corrosion products using Raman spectroscopy

被引：30
|
作者：
Hazan, E. [1 ]
Sadia, Y. [1 ]
Gelbstein, Y. [1 ]
机构：
[1] Ben Gurion Univ Negev, Dept Mat Engn, IL-84105 Beer Sheva, Israel
来源：
CORROSION SCIENCE | 2013年 / 74卷
关键词：
Low alloy steel; Raman spectroscopy; Atmospheric corrosion; High temperature corrosion; Oxidation; Rust; TEMPERATURE OXIDATION; IRON-OXIDES; PURE IRON; KINETICS; STEEL; AIR; RUST;
D O I：
10.1016/j.corsci.2013.05.002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Most of the currently available corrosion product characterization techniques require extensive samples preparation methods and cannot be employed under aqueous conditions. Raman spectroscopy possesses the advantage of characterization of the corrosion products under practical operation conditions, including aqueous, without any sample preparation procedures. The present study examines the corrosion characteristics of AISI-4340 steel at aqueous and atmospheric environments using Raman spectroscopy. FeO, Fe2O3, and Fe3O4 were observed as the main corrosion products. The measured oxides thicknesses ratio were compared to the theoretic value obtained from Tammann equation. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：414 / 418
页数：5
相关论文
共 50 条
  • [41] Catalysts characterization using operando Raman spectroscopy
    Li, Guosheng
    Hu, Dehong
    Xia, Gordon
    Zhang, Conrad
    Kim, Do Heui
    Peden, Charles H. F.
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2010, 240
  • [42] Corrosion behaviour of magnetron sputtered α- and β-Ta coatings on AISI 4340 steel as a function of coating thickness
    Maeng, S.
    Axe, L.
    Tyson, T. A.
    Gladczuk, L.
    Sosnowski, M.
    CORROSION SCIENCE, 2006, 48 (08) : 2154 - 2171
  • [43] Corrosion Failure of AISI4340 Steel in Oxygen-Containing Aqueous Chloride Solution
    Zhang, Ping
    Shi, Yafei
    Zhao, Hanqing
    Zhang, Fulin
    Zhang, Guoqiang
    Rao, Sixian
    INTERNATIONAL JOURNAL OF CORROSION, 2019, 2019
  • [44] Turning of hardened AISI 4340 steel using coated carbide inserts
    de Lima, I. G.
    de Avila, R. F.
    Abrao, A. M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (08) : 1359 - 1366
  • [45] Analysis of Quenching Parameters in AISI 4340 Steel by Using Design of Experiments
    Nunes, Marlon Muniz
    da Silva, Uardo Miguel
    Renzetti, Reny Angela
    Brito, Tarcisio Goncalves
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (01):
  • [46] Characterization of corrosion products formed on mild steel in deoxygenated water by Raman spectroscopy and energy dispersive X-ray spectrometry
    Leban, Mirjam Bajt
    Kosec, Tadeja
    ENGINEERING FAILURE ANALYSIS, 2017, 79 : 940 - 950
  • [47] Hot-corrosion resistance of dissimilar AISI 4340 and AISI 304L weldments in the molten salt environment at 600°C
    Arivarasu, M.
    Kannan, M. Venkatesh
    Ramkumar, K. Devendranath
    Arivazhagan, N.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2017, 52 (02) : 114 - 123
  • [48] INSITU DETERMINATION OF CORROSION PRODUCTS FORMED ON PAINTED GALVANIZED STEEL BY RAMAN-SPECTROSCOPY
    THIERRY, D
    MASSINON, D
    HUGOTLEGOFF, A
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1991, 138 (03) : 879 - 880
  • [49] The Characterization of Some Steel Corrosion Products by FT-IR Spectroscopy
    Soare, Aurel
    Chiosa, Valentina
    Mandravel, Cristina
    REVISTA DE CHIMIE, 2008, 59 (11): : 1266 - 1270
  • [50] The characterization of Sn-based corrosion products in ancient bronzes: a Raman approach
    Ospitali, Francesca
    Chiavari, Cristina
    Martini, Carla
    Bernardi, Elena
    Passarini, Fabrizio
    Robbiola, Luc
    JOURNAL OF RAMAN SPECTROSCOPY, 2012, 43 (11) : 1596 - 1603
12345