Characterization of AISI 4340 corrosion products using Raman spectroscopy

被引：31
|
作者：
Hazan, E. [1 ]
Sadia, Y. [1 ]
Gelbstein, Y. [1 ]
机构：
[1] Ben Gurion Univ Negev, Dept Mat Engn, IL-84105 Beer Sheva, Israel
来源：
CORROSION SCIENCE | 2013年 / 74卷
关键词：
Low alloy steel; Raman spectroscopy; Atmospheric corrosion; High temperature corrosion; Oxidation; Rust; TEMPERATURE OXIDATION; IRON-OXIDES; PURE IRON; KINETICS; STEEL; AIR; RUST;
D O I：
10.1016/j.corsci.2013.05.002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Most of the currently available corrosion product characterization techniques require extensive samples preparation methods and cannot be employed under aqueous conditions. Raman spectroscopy possesses the advantage of characterization of the corrosion products under practical operation conditions, including aqueous, without any sample preparation procedures. The present study examines the corrosion characteristics of AISI-4340 steel at aqueous and atmospheric environments using Raman spectroscopy. FeO, Fe2O3, and Fe3O4 were observed as the main corrosion products. The measured oxides thicknesses ratio were compared to the theoretic value obtained from Tammann equation. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：414 / 418
页数：5
相关论文
共 50 条
  • [1] Characterization of corrosion products formed on the surface of carbon steel by Raman spectroscopy
    Nie, Xianghui
    Li, Xiaogang
    Du, Cuiwei
    Huang, Yizhong
    Du, He
    JOURNAL OF RAMAN SPECTROSCOPY, 2009, 40 (01) : 76 - 79
  • [2] The Characterization of Some Steel Corrosion Products by FT-IR Spectroscopy
    Soare, Aurel
    Chiosa, Valentina
    Mandravel, Cristina
    REVISTA DE CHIMIE, 2008, 59 (11): : 1266 - 1270
  • [3] Corrosion fatigue crack growth of AISI 4340 steel
    Weng, Lin
    Zhang, Jixi
    Kalnaus, Sergiy
    Feng, Miaoling
    Jiang, Yanyao
    INTERNATIONAL JOURNAL OF FATIGUE, 2013, 48 : 156 - 164
  • [4] Hot-corrosion resistance of dissimilar AISI 4340 and AISI 304L weldments in the molten salt environment at 600°C
    Arivarasu, M.
    Kannan, M. Venkatesh
    Ramkumar, K. Devendranath
    Arivazhagan, N.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2017, 52 (02) : 114 - 123
  • [5] Stress-Corrosion Cracking of AISI 4340 Steel in Aqueous Environments
    Kalnaus, Sergiy
    Zhang, Jixi
    Jiang, Yanyao
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (02): : 434 - 447
  • [6] Structural surface characterization of ion nitrided AISI 4340 steel
    Sirin, Sule Yildiz
    Kaluc, Erdinc
    MATERIALS & DESIGN, 2012, 36 : 741 - 747
  • [7] Characterization of corrosion products formed on mild steel in deoxygenated water by Raman spectroscopy and energy dispersive X-ray spectrometry
    Leban, Mirjam Bajt
    Kosec, Tadeja
    ENGINEERING FAILURE ANALYSIS, 2017, 79 : 940 - 950
  • [8] Raman spectroscopy study of glass corrosion
    Hruska, Branislav
    Gavenda, Tadeas
    Vasicek, Filip
    Svoboda, Roman
    VIBRATIONAL SPECTROSCOPY, 2020, 109
  • [9] In situ Raman spectroscopy for corrosion products of zinc in humidified atmosphere in the presence of sodium chloride precipitate
    Ohtsuka, T
    Matsuda, M
    CORROSION, 2003, 59 (05) : 407 - 413
  • [10] Characterization of corrosion products on archaeological iron coins
    Lv, Guo Cheng
    Wang, Zi Se
    Wu, Li Mei
    Xu, Chunchun
    ANTI-CORROSION METHODS AND MATERIALS, 2011, 58 (01) : 39 - 45
12345