Improve the thermal conductivity of 10w40-engine oil at various temperature by addition of Al2O3/Fe2O3 nanoparticles

被引:94
作者
Sulgani, Mohsen Tahmasebi [1 ]
Karimipour, Arash [1 ]
机构
[1] Islamic Azad Univ, Najafabad Branch, Dept Mech Engn, Najafabad, Iran
关键词
Thermal properties; 10w40-oil; Various temperature; Experimental study; Al2O3/Fe2O3; nanoparticles; WATER/GRAPHENE OXIDE NANOFLUID; COPPER-WATER NANOFLUID; HEAT-TRANSFER; THERMOPHYSICAL PROPERTIES; RHEOLOGICAL BEHAVIOR; MIXED CONVECTION; PARTICLE-SIZE; VISCOSITY; FLOW; MICROCHANNEL;
D O I
10.1016/j.molliq.2019.03.140
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Oils are used as coolants and lubricants in different industrial systems with the aim of reducing friction between parts and their abrasion. The objective of the present study was to investigate the effect of addition of Al2O3-Fe2O3 Nano powder hybrid on the thermal properties of 10w40 engine oil. In this study, the effect of nanoparticle concentration at different mass fractions (0, 0.25, 0.5, 1, 2, and 4) was examined. Experiments were conducted within a temperature range of 25-65 degrees C. The nano-lubricant was prepared using the two-stage method. An ultrasonic probe was used for 45 min to uniformly distribute the nanoparticles in the base fluid. The thermal conductivity coefficient of the hybrid nanofluid was measured using the KD2-Pro thermal analyzer, the results of which indicated that even the smallest mass concentration improved the thermal properties of the nano-lubricant. Accordingly, the largest improvement occurred at a mass fraction of 4%, i.e. 33% of the base oil. In order to calculate the thermal conductivity of the nano-lubricant using the temperature and mass fractions of the particles, the curve fitting method was applied to the experimental data to find a highly accurate experimental relation in SigmaPlot V12. (C) 2019 Published by Elsevier B.V.
引用
收藏
页码:660 / 666
页数:7
相关论文
共 50 条
[11]   The effect of particle size on the thermal conductivity of alumina nanofluids [J].
Beck, Michael P. ;
Yuan, Yanhui ;
Warrier, Pramod ;
Teja, Amyn S. .
JOURNAL OF NANOPARTICLE RESEARCH, 2009, 11 (05) :1129-1136
[12]   Heat transfer in Nanofluids - A review [J].
Das, Sarit Kumar ;
Choi, Stephen U. S. ;
Patel, Hrishikesh E. .
HEAT TRANSFER ENGINEERING, 2006, 27 (10) :3-19
[13]   Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles [J].
Eastman, JA ;
Choi, SUS ;
Li, S ;
Yu, W ;
Thompson, LJ .
APPLIED PHYSICS LETTERS, 2001, 78 (06) :718-720
[14]   Preparation and thermal properties of oil-based nanofluid from multi-walled carbon nanotubes and engine oil as nano-lubricant [J].
Ettefaghi, Ehsan-o-Ilah ;
Ahmadi, Hojjat ;
Rashidi, Alimorad ;
Nouralishahi, Amideddin ;
Mohtasebi, Seyed Saeid .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 46 :142-147
[15]   Morphology dependence of thermal and rheological properties of oil-based nanofluids of CuO nanostructures [J].
Farboda, Mansoor ;
Asl, Razieh Kouhpeymani ;
Abadi, Amin Reza Noghreh .
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2015, 474 :71-75
[16]   Experimental investigation of the effects of temperature and mass fraction on the dynamic viscosity of CuO-paraffin nanofluid [J].
Ghasemi, Samad ;
Karimipour, Arash .
APPLIED THERMAL ENGINEERING, 2018, 128 :189-197
[17]   Numerical Study of Entropy Generation due to Coupled Laminar and Turbulent Mixed Convection and Thermal Radiation in an Enclosure Filled with a Semitransparent Medium [J].
Goodarzi, M. ;
Safaei, M. R. ;
Oztop, Hakan F. ;
Karimipour, A. ;
Sadeghinezhad, E. ;
Dahari, M. ;
Kazi, S. N. ;
Jomhari, N. .
SCIENTIFIC WORLD JOURNAL, 2014,
[18]   Factors affecting the performance of hybrid nanofluids: A comprehensive review [J].
Hamzah, Muhammad Hafiz ;
Sidik, Nor Azwadi Che ;
Ken, Tan Lit ;
Mamat, Rizalman ;
Najafi, G. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 115 :630-646
[19]   An experimental study on thermal conductivity of F-MWCNTs-Fe3O4/EG hybrid nanofluid: Effects of temperature and concentration [J].
Harandi, Saeed Sarbolookzadeh ;
Karimipour, Arash ;
Afrand, Masoud ;
Akbari, Mohammad ;
D'Orazio, Annunziata .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2016, 76 :171-177
[20]   Evaluation of MWCNTs-ZnO/5W50 nanolubricant by design of an artificial neural network for predicting viscosity and its optimization [J].
Hemmat Esfe, Mohammad ;
Goodarzi, Mohsen ;
Reiszadeh, Mandi ;
Afrand, Masoud .
JOURNAL OF MOLECULAR LIQUIDS, 2019, 277 :921-931