Broadband RF-Input Continuous-Mode Load-Modulated Balanced Power Amplifier With Input Phase Adjustment

被引：85

作者：

Pang, Jingzhou ^{[1
]}

Chu, Chenhao ^{[1
]}

Li, Yue ^{[1
]}

Zhu, Anding ^{[1
]}

机构：

[1] Univ Coll Dublin, Sch Elect & Elect Engn, Dublin D04 E4X0, Ireland

来源：

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES | 2020年 / 68卷 / 10期

基金：

欧盟地平线“2020”; 爱尔兰科学基金会;

关键词：

Bandwidth; Impedance; Broadband communication; Phase modulation; Wireless communication; Peak to average power ratio; Broadband; continuous mode; 5G; high efficiency; load-modulated balanced power amplifier (LMBA); load modulation; power amplifier (PA); HIGH-EFFICIENCY; DOHERTY; DESIGN; BANDWIDTH;

D O I：

10.1109/TMTT.2020.3012141

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This article presents the theory and design methodology of broadband RF-input continuous-mode load-modulated balanced power amplifier (CM-LMBA) by introducing the CM output-matching networks in the LMBA architecture. It is illustrated that the CM impedance condition can be achieved by properly adjusting the phase difference between the different PA branches in the proposed CM-LMBA during the entire load modulation process. An RF-input CM-LMBA with 1.45-2.45-GHz bandwidth using commercial GaN transistors is designed and implemented to validate the proposed architecture. The fabricated CM-LMBA attains a measured 11.2-13.4-dB gain and around 40-W saturated power. Power-added efficiency (PAE) of 46.4%-56.5% and 43.2%-50.3% is achieved at 6- and 8-dB output power back-offs throughout the designed band. When driven by a 100-MHz OFDM signal with an 8-dB peak-to-average power ratio (PAPR), the proposed CM-LMBA achieves better than -46-dBc adjacent channel leakage ratio (ACLR) and higher than 45% average PAE after digital predistortion at 1.8 and 2.1 GHz.

引用

页码：4466 / 4478

页数：13