An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel

被引：186

作者：

Acarer, Mustafa ^{[1
]}

Demir, Bilge ^{[1
]}

机构：

[1] Karabuk Univ, Fac Tech Educ, Met Educ Dept, Welding Div, Karabuk, Turkey

来源：

MATERIALS LETTERS | 2008年 / 62卷 / 25期

关键词：

dual phase steel; explosive welding; microstructural; mechanical properties;

D O I：

10.1016/j.matlet.2008.05.060

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The aim of this paper is investigation of microstructure and property relationship in aluminum-HSLA steel and aluminum-dual phase steel bimetals fabricated by explosive welding technique. Dual phase steel was produced by intercritical annealing and water quenching from 1.45Mn-0.2Si-0.186C HSLA steel. Hardness. tensile shear strength. tensile strength, toughness and microstructure of explosively welded aluminum-HSLA steel and aluminum-dual phase steel were evaluated. Both bimetals have a straight bonding interface. It was also seen that plastic deformation of dual phase steel was higher than HSLA steel near interfaces of bimetals. The hardness was increased near the bond interface of bimetals. Tensile and tensile shear strength tests showed that aluminum-dual phase steel is superior than aluminum-HSLA steel. Also, impact toughness of aluminum-dual phase steel was found significantly higher than that of aluminum-HSLA steel. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：4158 / 4160

页数：3

共 21 条

[1] The influence of some factors on steel/steel bonding quality on there characteristics of explosive welding joints [J].

Acarer, M ;

Gülenç, B ;

Findik, F .

JOURNAL OF MATERIALS SCIENCE, 2004, 39 (21) :6457-6466

[2] Investigation of explosive welding parameters and their effects on microhardness and shear strength [J].

Acarer, M ;

Gülenç, B ;

Findik, F .

MATERIALS & DESIGN, 2003, 24 (08) :659-664

[3]

BANERJEE SK, 1971, MET CONSTR-BRIT WELD, V3, P268

[4]

BAUCHER JH, 1977, SAE PREPRINT, P730

[5] Effects of microstructure and notches on the mechanical properties of dual-phase steels [J].

Bayram, A ;

Uguz, A ;

Ula, M .

MATERIALS CHARACTERIZATION, 1999, 43 (04) :259-269

[6]

BRASHER DG, 1995, ADV MATER PROCESS, V147, P37

[7]

Chao R. M., 1997, Mar. Struct, V10, P353, DOI [10.1016/S0951-8339(96)00018-4, DOI 10.1016/S0951-8339(96)00018-4]

[8] INFLUENCE OF MARTENSITE COMPOSITION AND CONTENT ON PROPERTIES OF DUAL PHASE STEELS [J].

DAVIES, RG .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1978, 9 (05) :671-679

[9] Examination of copper/stainless steel joints formed by explosive welding [J].

Durgutlu, A ;

Gülenç, B ;

Findik, F .

MATERIALS & DESIGN, 2005, 26 (06) :497-507

[10] Effect of austenite dispersion on phase transformation in dual phase steel [J].

Erdogan, M .

SCRIPTA MATERIALIA, 2003, 48 (05) :501-506

← 1 2 3 →