Friction stir welding of Aluminium matrix composites - A Review

被引：15

作者：

Subramanya, Prabhu ^{[1
]}

Amar, Murthy ^{[2
]}

Arun, Shettigar ^{[2
]}

Mervin, Herbert ^{[1
]}

Shrikantha, Rao ^{[1
]}

机构：

[1] NITK Surathkal, Surathkal, Karnataka, India

[2] Manipal Acad Higher Educ, Manipal Inst Technol, Dept Mech & Mfg Engn, Manipal, Karnataka, India

来源：

INTERNATIONAL CONFERENCE ON RESEARCH IN MECHANICAL ENGINEERING SCIENCES (RIMES 2017) | 2018年 / 144卷

关键词：

MECHANICAL-PROPERTIES; TENSILE-STRENGTH; TOOL WEAR; PIN PROFILE; MICROSTRUCTURE; OPTIMIZATION; PREDICTION; PARAMETERS; RESISTANCE; EVOLUTION;

D O I：

10.1051/matecconf/201814403002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Friction stir welding (FSW) is established as one of the prominent welding techniques to join aluminium matrix composites (AMCs). It is a solid state welding process, takes place well below the melting temperature of the material, eliminates the detrimental effects of conventional fusion welding process. Although the process is capable to join AMCs, challenges are still open that need to be fulfill to widen its applications. This paper gives the outline of the friction stir welding technique used to join AMCs. Effect of process variables on the microstructure and mechanical properties of the joints, behavior of reinforcing materials during welding, effect of tool profiles on the joint strength are discussed in detail. Few improvements and direction for future research are also proposed.

引用

页数：13

共 52 条

[1] A review of tool wear prediction during friction stir welding of aluminium matrix composite [J].