Effect of microstructural degradation on acoustic emission during tensile deformation of 2.25Cr-1Mo steel

被引：2
|
作者：
Pattnaik, A. B. [1 ]
Jha, B. B. [1 ]
机构：
[1] CSIR Inst Minerals & Mat Technol, Bhubaneswar, Odisha, India
来源：
CANADIAN METALLURGICAL QUARTERLY | 2013年 / 52卷 / 02期
关键词：
2.25Cr-1Mo steel; Acoustic emission; Tensile deformation; Strain rate; Coarsening; ALLOYS;
D O I：
10.1179/1879139512Y.0000000048
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper a systematic study has been undertaken to correlate the microstructural variation with acoustic emission parameters during tensile deformation of 2.25Cr-1Mo steel. Tensile testing of normalised and thermally aged samples has been carried out at a strain rate of 6.66 x 10(-4) s(-1) with simultaneous monitoring of acoustic emission (AE) parameters. Results have shown that acoustic emission activities are higher for normalised condition and the same decreased with the severity of thermal aging. Higher acoustic emission activities in normalised condition have been attributed to the presence of fine coherent M3C and Mo2C precipitates, which strengthen the matrix as a result of precipitation hardening. The reduction in acoustic emission activities in thermally aged condition has been found to be due to spheroidisation and coarsening of carbide precipitates which result in an increase in inter particle spacing.
引用
收藏
页码：217 / 221
页数：5
相关论文
共 50 条
  • [1] The effect of hydrogen on the deformation mechanisms of 2.25Cr-1Mo low alloy steel revealed by acoustic emission
    You, Yiliang
    Teng, Quanquan
    Zhang, Zheng
    Zhong, Qunpeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 655 : 277 - 282
  • [2] Effect of tensile deformation on micromagnetic parameters in 0.2% carbon steel and 2.25Cr-1Mo steel
    Moorthy, V
    Vaidyanathan, S
    Jayakumar, T
    Raj, B
    Kashyap, BP
    ACTA MATERIALIA, 1999, 47 (06) : 1869 - 1878
  • [3] Effect of Microstructural Degradation on Solid Particle Erosion Behavior of 2.25Cr-1Mo Steel
    Sahoo, R.
    Jha, B. B.
    Sahoo, T. K.
    Mantry, S.
    TRIBOLOGY TRANSACTIONS, 2014, 57 (04) : 679 - 689
  • [4] Effect of microstructural features on the hot ductility of 2.25Cr-1Mo steel
    Chen, X. -M.
    Song, S. -H.
    Sun, Z. -C.
    Liu, S. -J.
    Weng, L. -Q.
    Yuan, Z. -X.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (10-11): : 2725 - 2732
  • [5] Acoustic emission studies during the high temperature oxidation of 2.25Cr-1Mo steel at 1173 K
    Jha, B. B.
    Mishra, B. K.
    Mohapatra, B. K.
    Ojha, S. N.
    MATERIALS AT HIGH TEMPERATURES, 2011, 27 (04) : 301 - 311
  • [6] Oxidation behaviour of 2.25Cr-1Mo steel and its characterisation using acoustic emission
    Jha, B. B.
    Mishra, B. K.
    Ojha, S. N.
    CANADIAN METALLURGICAL QUARTERLY, 2012, 51 (02) : 221 - 227
  • [7] Effect of cold working deformation on the internal friction of 2.25Cr-1Mo steel
    Liu, Xinbao
    Shiwa, Mitsuharu
    Sawada, Kota
    Yamawaki, Hisashi
    Watanabe, Makoto
    Yin, Fuxing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (24-25): : 6741 - 6744
  • [8] Effect of Microstructural Variation on Hardness Degradation of 2.25Cr-1Mo Steel and Its Impact on Residual Life Assessment
    Jha, B. B.
    Mishra, B. K.
    Ojha, S. N.
    CANADIAN METALLURGICAL QUARTERLY, 2010, 49 (03) : 293 - 299
  • [9] Degradation in tensile and creep properties of 2.25Cr-1Mo steel by long term service in plant
    Ohba, T
    Kimura, K
    Abe, F
    Yagi, K
    Nonaka, I
    MATERIALS SCIENCE AND TECHNOLOGY, 2005, 21 (04) : 476 - 482
  • [10] Microstructural modification in a laser-treated 2.25Cr-1Mo steel
    Rao, RVS
    Parameswaran, P
    Dayal, RK
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (05) : 515 - 520
12345