The effect of addition Mn on the morphology of Fe-rich phase in the Al-1Fe alloy

被引：1
作者：
Yu, Guojun [1 ]
Peng, Jihua [1 ]
机构：
[1] S China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Peoples R China
来源：
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3 | 2013年 / 602-604卷
关键词：
aluminium alloy; manganese; microstructure; Fe-rich phases; IRON; ALUMINUM;
D O I：
10.4028/www.scientific.net/AMR.602-604.590
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A flux with MnCl2 is used to control the morphology of microstructure in Al-1Fe alloys. An orthogonal test plan (L(3(3))) was employed to study the effect of the ratio of Mn/Fe, temperature and holding time on the morphology of the Fe-rich phase. Metallographic and image analys is techniques have been used to quantitatively examine the microstructural changes occurring with Mn addition. XRD analysis is employed to identify the phase of intermetallic compound in the alloy. It is found that when the ratio of Mn/Fe in the melt is located in the range from 1.5 to 2.0, the original needle like iorn phase can be transformed to be massive morphology, such as Chinese script, globule or polyhedral, and the area fraction of iron phase in the Al-1Fe alloy can be reduced by adding MnCl2 during the melt processing.
引用
收藏
页码：590 / 593
页数：4
相关论文
共 13 条
  • [1] Cohuell D.L., 1961, AFS T, V69, P610
  • [2] Crepeau P.N., 1995, AFS T, V103, P361
  • [3] Das SK, 2006, LIGHT MET, P911
  • [4] Removal of iron from molten recycled aluminum through intermediate phase filtration
    de Moraes, Humberto Lopes
    de Oliveira, Jose Roberto
    Romano Espinosa, Denise Crocce
    Soares Tenorio, Jorge Alberto
    [J]. MATERIALS TRANSACTIONS, 2006, 47 (07) : 1731 - 1736
  • [5] Interactions between iron, manganese, and the Al-Si eutectic in hypoeutectic Al-Si alloys
    Dinnis, C. M.
    Taylor, J. A.
    Dahle, A. K.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (11): : 3283 - 3291
  • [6] As-cast morphology of iron-intermetallics in Al-Si foundry alloys
    Dinnis, CM
    Taylor, JA
    Dahle, AK
    [J]. SCRIPTA MATERIALIA, 2005, 53 (08) : 955 - 958
  • [7] The effects of Mn additions on the microstructure and mechanical properties of Al-Si-Cu casting alloys
    Hwang, J. Y.
    Doty, H. W.
    Kaufman, M. J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2): : 496 - 504
  • [8] Influence of iron on castability and properties of aluminium silicon alloys: literature review
    Mbuya, TO
    Odera, BO
    Ng'ang'a, SP
    [J]. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2003, 16 (05) : 451 - 465
  • [9] MORPHOLOGICAL-STUDIES ON BETA-FESIAL5 PHASE IN AL-7SI-0.3MG ALLOY WITH TRACE ADDITIONS OF BE, MN, CR, AND CO
    MURALI, S
    RAMAN, KS
    MURTHY, KSS
    [J]. MATERIALS CHARACTERIZATION, 1994, 33 (02) : 99 - 112
  • [10] [孙常明 Sun Changming], 2007, [中国稀土学报, Journal of the Chinese Rare Earth Society], V25, P318
12