The influence of intercritical tempering treatment on the nickel concentration of retained austenite composition of a 9 % Ni steel

被引：0
|
作者：
Casarin, SJ
Kestenbach, HJ
Valencia, E
机构：
[1] Univ Fed Sao Paulo, EFSCAR, Dpto Eng Mat, Sao Paulo, Brazil
[2] Univ Cent de las Villas, Santa Clara, Cuba
来源：
REVISTA DE METALURGIA | 1999年 / 35卷 / 03期
关键词：
retained austenite; 9 % Ni steel; intercritical tempering treatment; microanalysis;
D O I：
10.3989/revmetalm.1999.v35.i3.618
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Retained austenite particles with nanometric dimensions in 9 % nickel steels microstructures were observed after differents intercritical tempering treatments ranged between 540 degrees C and 670 degrees C corresponding to the (alpha + gamma) two-phase field of Fe-Ni diagram. The thermal stability of particles turned out to be strongly influenced by its nickel contents and gradients of this element. The gradients were dependent on time and temperature of tempering.
引用
收藏
页码：148 / 154
页数：7
相关论文
共 50 条
  • [31] Effect of chemical composition on retained austenite in trip steel
    Chen, Y.
    Chen, X.
    Wang, Q.F.
    Yuan, G.L.
    Li, C.Y.
    Li, X.Y.
    Wang, Y.X.
    Acta Metallurgica Sinica (English Letters), 2002, 15 (04) : 339 - 345
  • [32] A study of retained austenite transformation during high-strength Cr-Ni-Mo-V steel tempering
    Ziza, A. I.
    Mikhailov, M. S.
    Tsukanov, V. V.
    Nikolaev, D. I.
    Lychagina, T. A.
    LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2018, 8 (02): : 146 - 151
  • [33] STUDY OF THE STEEL SHEET CONTAINING RETAINED AUSTENITE .4. EFFECT OF RETARD COOLING IN THE INTERCRITICAL TEMPERATURE-RANGE ON THE PROPERTIES OF SHEET STEEL CONTAINING RETAINED AUSTENITE
    SAKUMA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1405 - 1405
  • [34] Correlation between reversed austenite and mechanical properties in a low Ni steel treated by ultra-fast cooling, intercritical quenching and tempering
    Qi-Yuan Chen
    Jia-Kuan Ren
    Zhang-Long Xie
    Wei-Na Zhang
    Jun Chen
    Zhen-Yu Liu
    Journal of Materials Science, 2020, 55 : 1840 - 1853
  • [35] ON THE STABILITY OF RETAINED AUSTENITE AND ITS ROLE IN IMPROVEMENT OF THE CRYOGENIC TOUGHNESS FOR NI9 STEEL
    ZHANG, F
    HU, M
    LOU, ZF
    STEEL RESEARCH, 1993, 64 (03): : 178 - 182
  • [36] Stabilization of retained austenite by the two-step intercritical heat treatment and its effect on the toughness of a low alloyed steel
    Xie, Z. J.
    Yuan, S. F.
    Zhou, W. H.
    Yang, J. R.
    Guo, H.
    Shang, C. J.
    MATERIALS & DESIGN, 2014, 59 : 193 - 198
  • [37] Correlation between reversed austenite and mechanical properties in a low Ni steel treated by ultra-fast cooling, intercritical quenching and tempering
    Chen, Qi-Yuan
    Ren, Jia-Kuan
    Xie, Zhang-Long
    Zhang, Wei-Na
    Chen, Jun
    Liu, Zhen-Yu
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (04) : 1840 - 1853
  • [38] Influence of Intercritical Temperature on the Microstructure and Mechanical Properties of 6.5 Pct Ni Steel Processed by Ultra-fast Cooling, Intercritical Quenching and Tempering
    Chen, Qi-Yuan
    Zhang, Wei-Na
    Xie, Zhang-Long
    Ren, Jia-Kuan
    Chen, Jun
    Liu, Zhen-Yu
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (06): : 3030 - 3041
  • [39] Influence of Intercritical Temperature on the Microstructure and Mechanical Properties of 6.5 Pct Ni Steel Processed by Ultra-fast Cooling, Intercritical Quenching and Tempering
    Qi-Yuan Chen
    Wei-Na Zhang
    Zhang-Long Xie
    Jia-Kuan Ren
    Jun Chen
    Zhen-Yu Liu
    Metallurgical and Materials Transactions A, 2020, 51 : 3030 - 3041
  • [40] Effect of intercritical quenching on reversed austenite formation and cryogenic toughness in QLT-processed 9%Ni steel
    Zhao, X. Q.
    Pan, T.
    Wang, Q. F.
    Su, H.
    Yang, C. F.
    Yang, Q. X.
    Zhang, Y. Q.
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2007, 14 : 240 - 244
12345