On the use of Vibration Signal Analysis for Industrial Quality Control: Part I

被引：0

作者：

D'Elia, Gianluca ^{[1
]}

Delvecchio, Simone ^{[1
]}

Malago, Marco ^{[1
]}

Dalpiaz, Giorgio ^{[1
]}

机构：

[1] Univ Ferrara, Engn Dept Ferrara EnDIF, I-44100 Ferrara, Italy

来源：

ADVANCES IN CONDITION MONITORING OF MACHINERY IN NON-STATIONARY OPERATIONS | 2014年

关键词：

Vibration; Condition monitoring; Quality control; Helical gears; Diesel engines; Cold test; ELASTODYNAMIC ANALYSIS; SIMULATION;

D O I：

10.1007/978-3-642-39348-8_34

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Vibration signals can be successfully captured and analyzed for quality control at the end of the production line. Various signal processing techniques and their applications are presented in this paper. These applications demonstrate the importance of selecting proper signal processing tools in order to extract the most reliable information from the signals. The presented applications regards tooth fault detection in helical gears and the detection of assembly faults in diesel engines by means of cold test technology.

引用

页码：399 / 406

页数：8

共 14 条

[1]

Braun S., 1986, MECH SIGNATURE ANAL

[2]

Collacot R. A., 1979, VIBRATION MONITORING

[3] Effectiveness and sensitivity of vibration processing techniques for local fault detection in gears [J].

Dalpiaz, G ;

Rivola, A ;

Rubini, R .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2000, 14 (03) :387-412

[4] Advanced Signal Processing Tools for the Vibratory Surveillance of Assembly Faults in Diesel Engine Cold Tests [J].

Delvecchio, Simone ;

D'Elia, Gianluca ;

Mucchi, Emiliano ;

Dalpiaz, Giorgio .

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2010, 132 (02) :0210081-02100810

[5] Tool condition monitoring in drilling using vibration signature analysis [J].

ElWardany, TI ;

Gao, D ;

Elbestawi, MA .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1996, 36 (06) :687-711

[6]

Gonzalez R. C., 2004, Digital image processing using MATLAB, VSecond

[7] A summary of methods applied to tool condition monitoring in drilling [J].

Jantunen, E .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (09) :997-1010

[8] EXAMINATION OF A TECHNIQUE FOR THE EARLY DETECTION OF FAILURE IN GEARS BY SIGNAL-PROCESSING OF THE TIME DOMAIN AVERAGE OF THE MESHING VIBRATION [J].

MCFADDEN, PD .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 1987, 1 (02) :173-183

[9] Elastodynamic analysis of a gear pump. Part II: Meshing phenomena and simulation results [J].

Mucchi, E. ;

Dalpiaz, G. ;

Rivola, A. .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2010, 24 (07) :2180-2197

[10] Elastodynamic analysis of a gear pump. Part I: Pressure distribution and gear eccentricity [J].

Mucchi, E. ;

Dalpiaz, G. ;

Fernandez del Rincon, A. .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2010, 24 (07) :2160-2179

← 1 2 →