The effect of machining on the surface integrity and fatigue life

被引：232

作者：

Javidi, Ataollah ^{[1
]}

Rieger, Ulfried ^{[1
]}

Eichlseder, Wilfried ^{[1
]}

机构：

[1] Univ Min & Met Leoben, Dept Mech Engn, A-8700 Leoben, Austria

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2008年 / 30卷 / 10-11期

关键词：

surface integrity; machining; fatigue life;

D O I：

10.1016/j.ijfatigue.2008.01.005

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Steel components often have to be machined after heat treatment in order to obtain the correct shape as well as the required surface finish. Surface quality influences characteristics such as fatigue strength, wear rate, corrosion resistance, etc. Hard turning allows manufacturers to simplify their processes and still achieve the desired surface finish quality. There are various parameters such as cutting speed, feed rate, and tool nose radius that are known to have a large impact on surface quality. This paper describes how feed rate and nose radius affect the surface integrity and fatigue life in turning. The results show that the effect of residual stress on fatigue life is more pronounced than the effect of surface roughness. The goal of this work is to identify a relationship between surface quality, turning process parameters and fatigue behavior of 34CrNiMo6. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：2050 / 2055

页数：6

共 18 条

[1]

[Anonymous], 1996, FATIGUE DESIGN LIFE

[2] Estimating the fatigue stress concentration factor of machined surfaces [J].

Arola, D ;

Williams, CL .

INTERNATIONAL JOURNAL OF FATIGUE, 2002, 24 (09) :923-930

[3]

Brinksmeier E., 1982, ANN CIRP, V31, P491, DOI [DOI 10.1016/S0007-8506, 10.1016/S0007-8506(07)60172-3, DOI 10.1016/S0007-8506(07)60172-3]

[4] Residual stresses in turning - Part I Influence of process parameters [J].

Capello, E .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 160 (02) :221-228

[5] The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning [J].

Dahlman, P ;

Gunnberg, F ;

Jacobson, M .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (02) :181-184

[6]

FIELD M, 1971, ANN CIRP, V20, P153

[7] The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel [J].

Gunnberg, Fredrik ;

Escursell, Marcel ;

Jacobson, Michael .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 174 (1-3) :82-90

[8] Surface integrity of hard-turned M50 steel [J].

Jacobson, M .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (01) :47-54

[9] Cutting speed influence on surface integrity of hard turned bainite steel [J].

Jacobson, M ;

Dahlman, P ;

Gunnberg, F .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 128 (1-3) :318-323

[10]

KONIG W, 1993, ANN CIRP, V42, P39

← 1 2 →