In this work, two sample treatment procedures have been evaluated for the determination of veterinary drug residues in milk. In order to cover a wide range of polarities, a total of 66 veterinary drugs with log K-ow ranging from -1 to 5 were selected. Two sample cleanup steps, (i) dispersive solid-phase extraction (dSPE) using enhanced matrix removal lipid as sorbent and (ii) solid-phase extraction (in pass-through mode) using Oasis HLB PRiME cartridges, were critically assessed in terms of sample throughput, recovery, matrix effect, cleanliness of extracts, limit of quantification, and repeatability. The veterinary drugs tested (viz. benzimidazoles, cephalosporins, imidazothiazoles, macrolides, NSAIDs, penicillins, quinolones, steroids, sulfonamides, and -agonists) were analyzed by ultra-high-performance liquid chromatography tandem mass spectrometry. According to the results, both methods exhibited similar recovery rates between 70 and 120% for most of compounds tested. Matrix effects were satisfactory for both methodologies, although the tolerance to matrix effects was slightly higher with HLB PRiME with nearly negligible matrix effects in most cases. Limits of quantitation were also well below the current maximum residue levels established by the European Union. Notably, sample throughput was higher in the case of HLB PRiME, since this pass-through SPE cleanup approach involved fewer steps than the EMR-Lipid dSPE approach. The results in terms of analysis time, sensitivity, precision, cleanliness of extracts, and matrix effect showed the suitability of both procedures for the monitoring of veterinary drugs residues in milk samples in a single run.
