Effects of Lanthanum Substitution by Strontium and Calcium in La-Ni-Al Perovskite Oxides in Dry Reforming of Methane

Mixed perovskite oxides with CaxLa1-xNi0.3Al0.2O3-d and SrxLa1-xNi0.3Al0.7O3-d (x = 0, 0.2, 0.5, 0.8, and 1.0; d = 0.5x) components have been prepared by a sol-gel method. The effects of the partial substitution of La by Ca and Sr in dry CH4 reforming were investigated at 500-800 degrees C and 101 kPa. The resulting oxides were examined by Fourier-transform infrared Spectroscopy, X-ray diffraction, temperature-programmed reduction, scanning electron microscopy, energy dispersive X-ray spectrometry, and BET surface area analysis. Studies following the catalytic tests by carbon analysis show some carbon deposition on this catalytic system. The results indicate that all initial salt entered into a propionate structure, and that most of the solid solution has well defined perovskite structure with surface areas between 3.5 and 9.5 m(2)/g. Most of the catalysts performed well in the dry reforming, with CH4 conversions up to 90%, H-2 Yields up to 80%, and H-2 selectivity up to 90%. Among the samples, Sr0.2La0.2Ni0.3Al0.7O2.9 showed an excellent catalytic performance in CH4 dry reforming, with a H-2/CO ratio of 1, whereas Ca0.8La0.2Ni0.3Al0.7O2.6 showed the lowest coke formation (approximately 0.71%).