Effect of cooling methods on dimensional accuracy and surface finish of a turned titanium part

被引：27
|
作者：
Islam, M. N. [1 ]
Anggono, J. M. [2 ]
Pramanik, A. [1 ]
Boswell, B. [1 ]
机构：
[1] Curtin Univ, Dept Mech Engn, Bentley, WA 6102, Australia
[2] CV Duta Teknik, Tangerang, Indonesia
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2013年 / 69卷 / 9-12期
关键词：
Dry turning; Flood turning; Cryogenic cooling turning; Titanium alloy; Pareto ANOVA; Taguchi method; TOOL WEAR; CUTTING PARAMETERS; MINIMUM QUANTITY; LUBRICATION MQL; TAGUCHI METHOD; ROUGHNESS; PERFORMANCE; CHIP; OPTIMIZATION; MECHANISMS;
D O I：
10.1007/s00170-013-5223-3
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
In metal cutting, the choice of cooling method influences the deformation mechanism, which is related to the dimensional accuracy and surface finish of the parts. The deformation mechanism of titanium alloys under machining conditions is known to be very different from that of commonly used industrial materials. Therefore, the effect of cooling methods on dimensional accuracy and surface finish in machining titanium is of particular interest. This paper investigates experimentally and analytically the influence of cooling method and cutting parameters on two major dimensional accuracy characteristics of a turned titanium part-diameter error and circularity, and surface finish. Data were analyzed via three methods: traditional analysis, Pareto ANOVA, and Taguchi method. The findings indicate that the cooling method has significant effect on circularity error (contribution ratio 76.75 %), moderate effect on diameter error (contribution ratio 25.00 %), and negligible effect on surface finish (contribution ratio 0.16 %).
引用
收藏
页码：2711 / 2722
页数：12
相关论文
共 38 条
  • [21] Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes
    Kurt, Mustafa
    Bagci, Eyup
    Kaynak, Yusuf
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 40 (5-6) : 458 - 469
  • [22] The Effect of Cooling Time and Colorant Pigment on the Dimensional Accuracy of Plastic Injection Molded Closure
    Njagi, John K.
    Otieno, Steven O.
    Mwema, Fredrick M.
    Muchiri, Peter N.
    JOURNAL OF POLYMER & COMPOSITES, 2023, 11 : S93 - S100
  • [23] STUDY OF THE EFFECT OF TOOLPATH AND MACHINING PARAMETERS ON SPHERICITY, SURFACE FINISH, AND DIMENSIONAL TOLERANCE OF POLYMER ACETABULAR CUPS
    Becerra-Becerra, E.
    Vidal-Lesso, A.
    Saldana-Robles, A.
    Reveles-Arredondo, J. F.
    PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 3, 2023,
  • [24] COMPARATIVE STUDY ON THE DIMENSIONAL ACCURACY AND SURFACE QUALITY OF PLATES CUT THROUGH UNCONVENTIONAL METHODS
    Herghelegiu, Eugen
    Shnakovszky, Carol
    Radovanovic, Miroslav
    Raveica, Crinel Ionel
    MODTECH 2012: NEW FACE OF T M C R, VOLS I AND II, 2012, : 433 - 436
  • [25] The effect of cooling lubrication methods on surface roughness measured by the white light interferometer
    Jiang, Feng
    Li, Jianfeng
    Sun, Jie
    Zhang, Song
    ADVANCES IN ABRASIVE TECHNOLOGY XII, 2009, 76-78 : 471 - 476
  • [26] Peck drilling of CFRP/titanium stacks: effect of tool wear on hole dimensional and geometrical accuracy
    Umberto Prisco
    Filomena Impero
    F. Rubino
    Production Engineering, 2019, 13 : 529 - 538
  • [27] Peck drilling of CFRP/titanium stacks: effect of tool wear on hole dimensional and geometrical accuracy
    Prisco, Umberto
    Impero, Filomena
    Rubino, F.
    PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2019, 13 (05): : 529 - 538
  • [28] Effect of cutting parameters on the dimensional accuracy and surface finish in the hard turning of MDN250 steel with cubic boron nitride tool, for developing a knowledged base expert system
    Sasan Yousefi
    Mehdi Zohoor
    International Journal of Mechanical and Materials Engineering, 2019, 14
  • [29] A cost-effective approach for rapid manufacturing a low pressure wax injection mold with high surface finish and high dimensional accuracy
    Kuo, C-C
    Su, S-J
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2013, 44 (04) : 330 - 339
  • [30] Effect of Laser Power and Powder Flow Rate on Dilution Rate and Surface Finish Produced During Laser Metal Deposition of Titanium Alloy
    Mahamood, Rasheedat M.
    Esther, T. Akinlabi
    Owolabi, Moses G.
    PROCEEDINGS OF 2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES (ICMIMT), 2017, : 6 - 10
1234