Intermetallic phase evolution and strengthening effect in Al-Mg2Si alloys with different Cu/Ni ratios

被引：26

作者：

Sun, Yilin ^{[1
]}

Li, Chong ^{[1
]}

Liu, Yongchang ^{[1
]}

Yu, Liming ^{[1
]}

Li, Huijun ^{[2
]}

机构：

[1] Tianjin Univ, Sch Mat Sci & Engn, State Key Lab Hydraul Engn Simulat & Safety, Tianjin 300350, Peoples R China

[2] Univ Wollongong, Sch Mech Mat & Mechatron Engn, Wollongong, NSW 2522, Australia

来源：

MATERIALS LETTERS | 2018年 / 215卷

基金：

中国国家自然科学基金;

关键词：

Metals and alloys; Casting; Intermetallic phases; Microstructure; Mechanical properties; IN-SITU; MECHANICAL-PROPERTIES; MICROSTRUCTURAL EVOLUTION; HYPEREUTECTIC AL-MG2SI; NANOCRYSTALLINE MG2SI; TENSILE PROPERTIES; NI; CU; BEHAVIOR; HARDNESS;

D O I：

10.1016/j.matlet.2017.12.067

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Microalloying of an Al-15%Mg2Si alloy (wt%) with Ni and Cu produced an enhanced strengthening response, increasing hardness whilst also improving tensile strength due to the formation and evolution of intermetallic phases. With the increase of Cu/Ni ratios, intermetallic phases translate from Al3Ni or Al3CuNi to Al7Cu4Ni, and the total volume fraction of Al3CuNi and Al7Cu4Ni increases to 3.51% (1% Ni and 5% Cu, Cu/Ni ratio = 5). The thermally stable Al3CuNi and Al7Cu4Ni phases are connected to each other forming chains and tend to build up a network. As a result, the ultimate tensile strength (at 350 degrees C) of the alloy (Cu/Ni ratio = 5) reached up to 132 MPa, 131.6% higher than that of Al-15%Mg2Si alloy. (C) 2017 Elsevier B.V. All rights reserved.

引用

页码：254 / 258

页数：5

共 50 条

[21] Effect of Cu/Mg Ratio on the Intermetallic Compound and Hot Tearing Susceptibility of Al-Cu-Mg Alloys
Yue, Chunyu
Zheng, Bowen
Su, Ming
Zuo, Xiaojiao
He, Mengyuan
Yuan, Xiaoguang
INTERNATIONAL JOURNAL OF METALCASTING, 2024, 18 (01) : 417 - 430
[22] The strengthening role of micro-sized phases and nano-precipitates in Al-Mg2Si-Cu(-Ni) alloys at 25 °C and 350 °C
Sun, Yilin
Li, Chong
Zhou, Zeyu
An, Rujie
Yu, Liming
Liu, Yongchang
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 2514 - 2521
[23] Evolution of Intermetallic Phases in Multicomponent Al-Si Foundry Alloys Containing Different Cu, Mg and Fe Content
Javidani, M.
Larouche, D.
Chen, X.
TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 122, 2014, 122 : 95 - 103
[24] Strengthening precipitates and mechanical performance of Al-Si-Cu-Mg cast alloys containing transition elements
Abdelaziz, M. H.
Elgallad, E. M.
Doty, H. W.
Samuel, F. H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 820
[25] Effect of Excess Mg on the Microstructure and Mechanical Properties of Al-Mg2Si High Pressure Die Casting Alloys
Yan, Feng
Ji, Shouxun
Fan, Zhongyun
LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 64 - 68
[26] EFFECT OF MG AND ZN CONTENTS ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF AL-SI-CU-MG ALLOYS
Nemri, Y.
Chiker, N.
Gueddouar, B.
Benamar, M. E. A.
Sahraoui, T.
Hadji, M.
INTERNATIONAL JOURNAL OF METALCASTING, 2018, 12 (01) : 20 - 27
[27] Effect of Various Mg/Si Ratios on Microstructure and Structural Properties of Thixoextruded Al-Si-Mg Alloys
Nithin, Abeyram M.
Davidson, M. J.
Rao, C. S. P.
SILICON, 2022, 14 (17) : 11675 - 11686
[28] The effect of solution temperature on the precipitates evolution and aging hardening response of Al-15%Mg2Si(-1%Cu) alloys
Sun, Yilin
Hu, Min
Li, Mengran
Li, Chong
Zhu, Xiangzhen
Xia, Xingchuan
Yu, Liming
Liu, Yongchang
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 17 : 1330 - 1337
[29] EFFECT OF AGING CONDITIONS ON PRECIPITATION HARDENING IN Al-Si-Mg AND Al-Si-Cu-Mg ALLOYS
Ibrahim, Mohamed F.
Samuel, Agnes M.
Samuel, Fawzy H.
Doty, Herbert W.
INTERNATIONAL JOURNAL OF METALCASTING, 2017, 11 (02) : 274 - 286
[30] In situ synthesizing SiC particles and its strengthening effect on an Al-Si-Cu-Ni-Mg piston alloy
Du, Xiaofan
Gao, Tong
Liu, Guiliang
Liu, Xiangfa
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 695 : 1 - 8

← 1 2 3 4 5 →