Superplasticity and superplastic forming of Mg-Al-Zn alloy sheets fabricated by strip casting method

被引:21
作者
Kim, W. J. [1 ]
Park, J. D. [1 ]
Yoon, U. S. [2 ]
机构
[1] Hongik Univ, Dept Mat Sci & Engn, Seoul 121791, South Korea
[2] JAMIC, Sunchon, Jeonnam, South Korea
关键词
A : metals and alloys; C : mechanical properties; D : strain high pressure;
D O I
10.1016/j.jallcom.2007.10.067
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Superplastic properties and formability of the AZ31 sheet processed by strip casting and subsequent warm rolling were examined. Microstructure of the AZ31 sheet with thickness of 1.3 mm was uniform and composed of equiaxed grains with an average size of 6.6 mu m. The sheet exhibited excellent superplasticity with a maximum elongation of 800% at 673 K and 2 x 10(-4) s(-1). A 250 mm x 250 mm size panel with complicated embossing patterns Could be successfully formed into near net shape by gas pressure against a single female die. Small grain size and slow gain growth during deformation resulted in the superior superplastic properties at 673 K. The governing deformation mechanisms in any given strain-rate and temperature ranges could be predicted by the deformation mechanism maps for Mg-Al-Zn alloys. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:197 / 202
页数:6
相关论文
共 10 条
[1]   Superplastic gas pressure forming of fine-grained AZ61 magnesium alloy sheet [J].
Chung, SW ;
Higashi, K ;
Kim, WJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 372 (1-2) :15-20
[2]  
Frost HJ, 1982, DEFORMATION MECH MAP
[3]   Investigation of post-superplaistic forming properties of AZ31 magnesium alloy [J].
Khraisheh, M. K. ;
Abu-Farha, F. K. ;
Weinmann, K. J. .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (01) :289-292
[4]   Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures [J].
Kim, WJ ;
Chung, SW ;
Chung, CS ;
Kum, D .
ACTA MATERIALIA, 2001, 49 (16) :3337-3345
[5]  
KIM WJ, 2007, MAT SCI ENG A UNPUB
[6]   Cavitation characteristics in AZ31 Mg alloys during LTSP or HSRSP [J].
Lee, CJ ;
Huang, JC .
ACTA MATERIALIA, 2004, 52 (10) :3111-3122
[7]   Relationship between texture and low temperature superplasticity in an extruded AZ31 Mg alloy processed by ECAP [J].
Lin, HK ;
Huang, JC ;
Langdon, TG .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 402 (1-2) :250-257
[8]   Secondary processing of AZ31 magnesium alloy concomitant with grain growth or dynamic recrystallization [J].
Takara, A ;
Nishikawa, Y ;
Watanabe, H ;
Somekawa, H ;
Mukai, T ;
Higashi, K .
MATERIALS TRANSACTIONS, 2004, 45 (07) :2377-2382
[9]   Mechanical properties and texture of a superplastically deformed AZ31 magnesium alloy [J].
Watanabe, Hiroyuki ;
Fukusumi, Masao .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 477 (1-2) :153-161
[10]   Superplasticity and cavitation in AZ31 Mg alloy at elevated temperatures [J].
Yin, DL ;
Zhang, KF ;
Wang, GF ;
Han, WB .
MATERIALS LETTERS, 2005, 59 (14-15) :1714-1718