Tribology of coated tools in conventional and HSC machining

被引：45

作者：

Kopac, J ^{[1
]}

Sokovic, M ^{[1
]}

Dolinsek, S ^{[1
]}

机构：

[1] Univ Ljubljana, Met Cutting Lab, Fac Mech Engn, Ljubljana 1000, Slovenia

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2001年 / 118卷 / 1-3期

关键词：

tribology system; coated tools; tool wear; high-speed cutting;

D O I：

10.1016/S0924-0136(01)00974-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The aim of research of the tribological conditions in the tool-workpiece interface in cutting processes is to find the main causes for unpredicted tool life. As is shown in the paper there are many causes for their influences on the tool wear. Not only mechanical and chemical but also thermo-chemical aspects of wear is important. The high cutting temperature, which is a result of high-speed cutting (HSC), enhances diffusion and oxidation process. Diffusion processes between the chip and the top rake surface of the cutting edge result in crater wear, and oxidation reactions with the environment induce scaling of the cutting edge. The phenomenon of central wear can be used to define the tool life in the case of HSC milling of alloyed tool steels (hardness > 45 HRC). (C) 2001 Elsevier Science B.V. All rights reserved.

引用

页码：377 / 384

页数：8

共 50 条

[31] A new elastic abrasive jet machining method for post-treatment of tool coatings: A case study on TiAlN coated tools for titanium machining [J].

Zhuang, Kejia ;

Wan, Liyang ;

Weng, Jian ;

Wu, Zhizheng ;

Zhang, Yuhua ;

Tian, Chengjin ;

Yang, Yan .

TRIBOLOGY INTERNATIONAL, 2023, 185

[32] Comparative machining studies on custom 450 alloy with TiCN, TiAlN coated and uncoated carbide tools using Taguchi-Fuzzy logic approach [J].

Kumar, T. Sampath ;

Ramanujam, R. ;

Vignesh, M. ;

Rohith, Dunna ;

Manoj, Vavilapalli ;

Sankar, Peddi Hema .

MATERIALS RESEARCH EXPRESS, 2019, 6 (06)

[33] Machining performance of pearlitic-ferritic nodular cast iron with coated carbide and silicon nitride ceramic tools [J].

Grzesik, W. ;

Rech, J. ;

Zak, K. ;

Claudin, C. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (02) :125-133

[34] Effect of derivative cutting on machining performance of micro textured tools [J].

Duan, Ran ;

Deng, Jianxin ;

Lei, Shuting ;

Ge, Dongliang ;

Liu, Yayun ;

Li, Xuemu .

JOURNAL OF MANUFACTURING PROCESSES, 2019, 45 :544-556

[35] Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304 [J].

Sharma, Neeraj ;

Gupta, Kapil .

MATERIALS RESEARCH EXPRESS, 2019, 6 (08)

[36] Cutting forces and wear analysis of Si3N4 diamond coated tools in high speed machining [J].

Martinho, R. P. ;

Silva, F. J. G. ;

Baptista, A. M. .

VACUUM, 2008, 82 (12) :1415-1420

[37] Effectiveness of synthetic coolant at 0°C on machining of SS304 with PVD coated TiCN tool to evaluate and compare tool wear and surface finish with conventional machining method [J].

Patil, Pravin ;

Karande, Prasad .

TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2023, 17 (04) :295-308

[38] An assessment of machining performance of CAPVD-coated carbide tools in face milling of Ti-6Al-4V [J].

Kumar, Aditya ;

Tandekar, Nitin ;

Gopal, A. Venu ;

Valleti, Krishna .

CERAMICS INTERNATIONAL, 2024, 50 (09) :16639-16649

[39] Adaptability of AlTiN-based coated tools with green cutting technologies in sustainable machining of 316L stainless steel [J].

Lai, Zhiwei ;

Wang, Chengyong ;

Zheng, Lijuan ;

Huang, Wen ;

Yang, Jianzhang ;

Guo, Guangyu ;

Xiong, Weiqiang .

TRIBOLOGY INTERNATIONAL, 2020, 148 (148)

[40] Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide tools [J].

Palanikumar, K. ;

Davim, J. Paulo .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (01) :511-519

← 1 2 3 4 5 →