Fabrications of high-aspect ratio microstructure on metallic substrate using SU-8 resist

被引：0
|
作者：
Liu, JQ [1 ]
Cai, BC [1 ]
Zhu, J [1 ]
Ding, GP [1 ]
Zhao, XL [1 ]
Yang, CS [1 ]
Chen, D [1 ]
机构：
[1] Shanghai Jiao Tong Univ, Thin Film & Microfabricat Key Lab State Educ Mini, Informat Storage Res Ctr, Shanghai 200030, Peoples R China
来源：
MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY AND DEVICES | 2001年 / 4601卷
关键词：
UV-LIGA; SU-8; high aspect ratio; metallic substrate; NMMS;
D O I：
10.1117/12.444698
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
SU-8 is a negative, epoxy type, near-UV photoresist. The resist has been specifically developed for ultrathick, high-aspect-ratio MEMS-type applications. The adhesion of the SU-8 resist with the metallic substrate is very poor, but it is necessary to overcome this shortcoming for providing low-cost LIGA-type process in MEMS applications. In this paper, several metallic films are used as the substrates. The Ti film with oxidation treatment is found to have the strongest adhesion to the resist. SU-8 resist has been proven to be very sensitive to process variations, so the experimental optimizing technique is used in the process. Using processing parameters as control factors, experiments are performed and results are evaluated. As the results being analyzed, a proposed fabrication process is derived from optimizing the control factors. The output structure has straight sidewall profile, fine line and space resolution. The aspect ratio is greater than 20.
引用
收藏
页码：200 / 204
页数：5
相关论文
共 50 条
  • [1] High aspect ratio microstructure fabrication using SU-8 resist
    Jun, Z
    Zhao, XL
    Ni, ZP
    MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY VI, 2000, 4174 : 86 - 89
  • [2] Process research of high aspect ratio microstructure using SU-8 resist
    J. Liu
    B. Cai
    J. Zhu
    G. Ding
    X. Zhao
    C. Yang
    D. Chen
    Microsystem Technologies, 2004, 10 : 265 - 268
  • [3] Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist
    H. Lorenz
    M. Despont
    P. Vettiger
    P. Renaud
    Microsystem Technologies, 1998, 4 : 143 - 146
  • [4] Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist
    Lorenz, H
    Despont, M
    Vettiger, P
    Renaud, P
    MICROSYSTEM TECHNOLOGIES, 1998, 4 (03) : 143 - 146
  • [5] Fabrication of high-aspect ratio SU-8 micropillar arrays
    Amato, Letizia
    Keller, Stephan S.
    Heiskanen, Arto
    Dimaki, Maria
    Emneus, Jenny
    Boisen, Anja
    Tenje, Maria
    MICROELECTRONIC ENGINEERING, 2012, 98 : 483 - 487
  • [6] Process research of high caspect ratio microstructure using SU-8 resist
    Liu, J
    Cai, B
    Zhu, J
    Ding, G
    Zhao, X
    Yang, C
    Chen, D
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2004, 10 (04): : 265 - 268
  • [7] Study of crack formation in high-aspect ratio SU-8 structures on silicon
    Bystrova, S.
    Luttge, R.
    van den Berg, A.
    MICROELECTRONIC ENGINEERING, 2007, 84 (5-8) : 1113 - 1116
  • [8] Fabrication of high aspect ratio metallic microstructures on ITO glass substrate using reverse-side exposure of SU-8
    Lu, Chunhua
    Yin, Xuefeng
    Wang, Min
    SENSORS AND ACTUATORS A-PHYSICAL, 2007, 136 (01) : 412 - 416
  • [9] High aspect ratio grating fabrication in SU-8 resist by UV-Curing nanoimprint
    Wang, Xudi
    Ge, Liangjin
    Lu, Jingjing
    Fu, Shaojun
    2008 INTERNATIONAL CONFERENCE ON OPTICAL INSTRUMENTS AND TECHNOLOGY: MEMS/NEMS TECHNOLOGY AND APPLICATIONS, 2009, 7159
  • [10] Precisely rectilinear electro-thermal microactuator using a high-aspect ratio microstructured Si/SU-8 composite
    Thubthimthong, Borriboon
    Lau, Gih Keong
    Boon, Chong Nyok
    Matham, Murukeshan Vadakke
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2012, 22 (11)
12345