Study on the Microstructure and Mechanical Properties of a High Strength Crack-Free Steel

被引：1

作者：

Qiu, Chunlin ^{[1
]}

Lan, Liangyun ^{[1
]}

Zhao, Dewen ^{[1
]}

Gao, Xiuhua ^{[1
]}

Wen, Jinglin

机构：

[1] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China

来源：

THERMEC 2011, PTS 1-4 | 2012年 / 706-709卷

关键词：

Crack-free steel; bainite; mechanical properties; microalloy element; LOW-CARBON STEEL; ACICULAR FERRITE; TEMPERATURE; BEHAVIOR;

D O I：

10.4028/www.scientific.net/MSF.706-709.2265

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Thermo-mechanical process followed by accelerated cooling and high temperature tempering was applied to investigate the microstructure evolution and mechanical properties of a high strength crack-free steel. Optical microscopy, transmission electron microscopy (TEM) and electron backscattering diffraction (EBSD) technique were employed to analyze the complex microstructural characteristics of the steel. The results indicated that the precipitation strengthening effect played an important role in optimizing the tempered strength. According to EBSD results, the average grain size of as-rolled specimens was about 3.2 mu m, and it increased slightly with the tempering temperature. Therefore, the grain refinement wasthe major reason for the good mechanical properties of the crack-free steel.

引用

页码：2265 / 2270

页数：6

共 9 条

[1] Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction.: Study of their toughness behavior [J].

Díaz-Fuentes, M ;

Iza-Mendia, A ;

Gutiérrez, I .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (11) :2505-2516

[2] Ductile-brittle transition temperature of ultrafine ferrite/cementite microstructure in a low carbon steel controlled by effective grain size [J].

Hanamura, T ;

Yin, F ;

Nagai, K .

ISIJ INTERNATIONAL, 2004, 44 (03) :610-617

[3]

IRVING B, 1991, WELD J, V70, P70

[4] FERRITIC MICROSTRUCTURES IN CONTINUOUSLY COOLED LOW-CARBON AND ULTRALOW-CARBON STEELS [J].

KRAUSS, G ;

THOMPSON, SW .

ISIJ INTERNATIONAL, 1995, 35 (08) :937-945

[5] Mechanical properties and microstructure of ULCB steels affected by thermomechanical rolling, quenching and tempering [J].

Lis, AK .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 106 (1-3) :212-218

[6] Nucleation of acicular ferrite on sulfide inclusion during rapid solidification of low carbon steel [J].

Liu, Zhongzhu ;

Kobayash, Yoshinao ;

Yin, Fuxing ;

Kuwabara, Mamoru ;

Nagai, Kotobu .

ISIJ INTERNATIONAL, 2007, 47 (12) :1781-1788

[7] Change of tensile behavior of a high-strength low-alloy steel with tempering temperature [J].

Yan, Wei ;

Zhu, Lin ;

Sha, Wei ;

Shan, Yi-yin ;

Yang, Ke .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2) :369-374

[8]

Yang J. R., 1992, Materials & Design, V13, P335, DOI 10.1016/0261-3069(92)90003-Z

[9]

Yao L.D., 2010, US Patent, Patent No. [US 0032062A1, 0032062]

← 1 →