Laboratory evaluation of hot-mix asphalt containing construction and demolition waste

被引：86

作者：

Pasandin, A. R. ^{[1
]}

Perez, I. ^{[1
]}

机构：

[1] Univ A Coruna, ETSI Caminos Canales & Puertos, La Coruna 15071, Spain

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2013年 / 43卷

关键词：

Hot-mix asphalt; Recycled concrete aggregate; Mechanical properties; RECYCLED CONCRETE AGGREGATE; PERMANENT DEFORMATION; BUILDING-MATERIALS; DEBRIS; HMA;

D O I：

10.1016/j.conbuildmat.2013.02.052

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

A laboratory study of the use of recycled concrete aggregates (RCAs) from construction and demolition waste (COW) in hot-mix asphalt (HMA) for base courses in pavements was conducted. HMA mixes containing 0%, 5%, 10%, 20% and 30% RCA in place of natural aggregate were evaluated. The Marshall mix design procedure was used to develop the mixes. To improve the moisture sensitivity of the mixes, they were cured in an oven for 4 h. The results indicated that the mixes comply with Spanish moisture damage specifications. The mechanical properties (stiffness, permanent deformation and fatigue) of the mixtures were studied. The mixtures exhibited good engineering properties. Although HMA with RCA requires further investigation, the results from this study were very promising. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：497 / 505

页数：9

共 50 条

[41] Characterization of Hot-mix Asphalt Made with Recycled Concrete Aggregates that Have been Cured for 4 Hours in the Oven [J].

Rodriguez Pasandin, Ana Ma ;

Perez Perez, Ignacio ;

Gomez Meijide, Breixo .

MATERIALS ENGINEERING AND TECHNOLOGY, 2014, 849 :81-87

[42] Cracking Resistance of Hot-Mix Asphalt Mixtures Containing Terminal Blend Rubberized Asphalt Nanocomposite at Intermediate Temperature [J].

Goodarzi, Mehdi Moazami ;

Naderi, Koorosh ;

Nejad, Fereidoon Moghadas .

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2021, 33 (10)

[43] Effect of Portland cement as a filler in hot-mix asphalt in hot regions [J].

Guha, Aioub H. ;

Assaf, Gabriel J. .

JOURNAL OF BUILDING ENGINEERING, 2020, 28

[44] Mechanical properties of hot-mix asphalt using waste crumber rubber and phenol formaldehyde polymer [J].

Ahmad, Mushtaq ;

Beddu, Salmia ;

Hussain, Shah ;

Manan, Aneel ;

Itam, Zarina Binti .

AIMS MATERIALS SCIENCE, 2019, 6 (06) :1164-1175

[45] Effects of Recycled Asphalt Material and Natural Pozzolan as Additives of Hot-Mix Asphalt: A Field Study [J].

Yilmaz, Bahadir ;

Senturk, Mehmet Akif .

INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 2024, 22 (06) :949-963

[46] Experimental evaluation of ceramic waste as filler in hot mix asphalt [J].

Shamsaei, Mohsen ;

Khafajeh, Ramin ;

Tehrani, Hosein Ghasemzadeh ;

Aghayan, Iman .

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2020, 22 (02) :535-543

[47] Experimental evaluation of ceramic waste as filler in hot mix asphalt [J].

Mohsen Shamsaei ;

Ramin Khafajeh ;

Hosein Ghasemzadeh Tehrani ;

Iman Aghayan .

Clean Technologies and Environmental Policy, 2020, 22 :535-543

[48] Mechanical properties of hot-mix asphalt made with recycled concrete aggregates coated with bitumen emulsion [J].

Pasandin, A. R. ;

Perez, I. .

CONSTRUCTION AND BUILDING MATERIALS, 2014, 55 :350-358

[49] Field evaluation of Witczak and Hirsch models for predicting dynamic modulus of hot-mix asphalt [J].

Dongré, R ;

Myers, L ;

D'Angelo, J ;

Paugh, C ;

Gudimettla, J .

2005 JOURNAL OF THE ASSOCIATION OF ASPHALT PAVING TECHNOLOGISTS: FROM THE PROCEEDINGS OF THE TECHNICAL SESSIONS, VOL 74, 2005, 74 :381-442

[50] Mechanical strength of an hot-mix asphalt using recycled concrete aggregate: mass and volume proportioning [J].

Sejin-Garces, Jorge Elias ;

Ahumada-Navarro, Galo ;

Rondon-Quintana, Hugo Alexander ;

Reyes-Lizcano, Fredy Alberto ;

Bastidas-Martinez, Juan Gabriel .

ROAD MATERIALS AND PAVEMENT DESIGN, 2024,

← 1 2 3 4 5 →