Impact of graphene reinforcement on mechanical properties of PLA 3D printed materials

被引：0
作者：
Marconi, S. [1 ]
Alaimo, G. [1 ]
Mauri, V [1 ]
Torre, M. [1 ]
Auricchio, F. [1 ]
机构：
[1] Univ Pavia, Dept Civil Engn & Architecture, Pavia, Italy
来源：
2017 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON ADVANCED MATERIALS AND PROCESSES FOR RF AND THZ APPLICATIONS (IMWS-AMP) | 2017年
关键词：
graphene; polylactic acid; 3D printing; FDM; mechanical characterization;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The addition of graphene nanoplatelets to plastics and polymers is currently under investigation as a promising method to improve their working conditions, thanks to graphene's good mechanical, thermal and electrical properties. The present work investigates the impact of graphene addition on the mechanical properties of a poly-lactic acid 3D printed material. We 3D printed specimens with 0%, 1% and 2% of graphene nanoparticles by weight, and we performed tensile tests. We found that graphene addition does not contributes to increase both stress and strain at failure, while it improves stiffness at 45 degrees, exhibiting an anomalous behavior with respect to standard composite materials.
引用
收藏
页数：3
相关论文
共 50 条
  • [21] The effect of natural Gongura roselle fiber on the mechanical properties of 3D printed ABS and PLA composites
    Appusamy, Anandha Moorthy
    Nanjappan, Natarajan
    Eswaran, Prakash
    Subramanian, Madheswaran
    POLIMERY, 2022, 67 (03) : 119 - 124
  • [22] Evaluation of Printing Parameters on Porosity and Mechanical Properties of 3D Printed PLA/PBAT Blend Parts
    Cardoso, Paulo Henrique Machado
    Coutinho, Rafaella Rabello Teixeira Perdone
    Drummond, Flavia Rocha
    da Conceicao, Marceli do Nascimento
    Thire, Rossana Mara da Silva Moreira
    MACROMOLECULAR SYMPOSIA, 2020, 394 (01)
  • [23] 3D printed biodegradable composites: An insight into mechanical properties of PLA/chitosan scaffold
    Singh, Sunpreet
    Singh, Gurminder
    Prakash, Chander
    Ramakrishna, Seeram
    Lamberti, Luciano
    Pruncu, Catalin, I
    POLYMER TESTING, 2020, 89
  • [24] Tuning mechanical properties of 3D printed composites with PLA:TPU programmable filaments
    Darnal, Aryabhat
    Shahid, Zaryab
    Deshpande, Himani
    Kim, Jeeeun
    Muliana, Anastasia
    COMPOSITE STRUCTURES, 2023, 318
  • [25] Mechanical, physical, and degradation properties of 3D printed PLA plus Mg composites
    Zeynivandnejad, Milad
    Moradi, Mohsen
    Sadeghi, Alireza
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 101 : 234 - 244
  • [26] The Influence of the Number of Layers and the Raster Angle on the Mechanical Properties of 3D Printed Materials
    Durovic, Strahinja
    Lazarevic, Dragan
    Milovanovic, Vladimir
    Misic, Milan
    Sarkocevic, Zivce
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2024, 31 (06): : 1892 - 1897
  • [27] Static and Dynamic Mechanical Properties of 3D printed Digital Materials
    Layth M. Ahmad
    Aaron Jackson
    Ashfaq Adnan
    Multiscale Science and Engineering, 2024, 6 (1) : 78 - 94
  • [28] Effects of micro particle reinforcement on mechanical properties of 3D printed parts
    Canti, Ebubekir
    Aydin, Mustafa
    RAPID PROTOTYPING JOURNAL, 2018, 24 (01) : 171 - 176
  • [29] Mechanical Testing of 3D Printed Materials
    Wagner, Nicole
    Handayani, Dika
    Okhuysen, Victor
    Garibaldi, Kyle
    Seitz, Michael
    TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2020, : 153 - 163
  • [30] 3D Printed Graphene-PLA Scaffolds Promote Cell Alignment and Differentiation
    Gasparotto, Matteo
    Bellet, Pietro
    Scapin, Giorgia
    Busetto, Rebecca
    Rampazzo, Chiara
    Vitiello, Libero
    Shah, Dhvanit Indravadan
    Filippini, Francesco
    INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2022, 23 (03)
12345