A study of the influence of TiO2 addition in Al2O3 coatings sprayed by suspension plasma spray

被引:30
作者
Klyatskina, E. [1 ]
Rayon, E. [1 ]
Darut, G. [2 ]
Salvador, M. D. [1 ]
Sanchez, E. [3 ]
Montavon, G. [2 ]
机构
[1] Univ Politecn Valencia, Inst Tecnol Mat, E-46022 Valencia, Spain
[2] Univ Technol Belfort Montbeliard, LERMPS EA3316, F-90010 Belfort, France
[3] Inst Tecnol Ceram, Castellon de La Plana 12006, Spain
关键词
Coating densification; Alcoholic suspension; Suspension plasma spraying; Al2O3-TiO2; Nanoindentation; THERMAL BARRIER COATINGS; MECHANICAL-PROPERTIES; MICROSTRUCTURE; HARDNESS; NANOINDENTATION; MODULUS; POWDERS; PARAMETERS; BEHAVIOR; APS;
D O I
10.1016/j.surfcoat.2015.07.029
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, five different concentrations of a mixture of TiO2/Al2O3 nanopowders in an alcoholic suspension at 10wt.% solid content were sprayed by Suspension Plasma Spraying on steel discs. The influence of the presence of TiO2 at 0,13,40 and 75wt.% in Al2O3 was analysed by studying the properties of the sprayed coatings. Microscopy analysis of the projected coatings revealed a homogeneously distributed microstructure, where the densification of the coating increases with TiO2 content, while the original nanostructure is maintained. A nanoindentation study revealed an increment of nanohardness and elastic modulus due to the densifying effect of TiO2. The addition of significant amounts of TiO2 has been revealed as necessary in order to favour the fusion of Al2O3 in the SPS process. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:25 / 29
页数:5
相关论文
共 36 条
  • [1] Effect of TiO2 addition on the microstructure and nanomechanical properties of Al2O3 Suspension Plasma Sprayed coatings
    Bannier, E.
    Vicent, M.
    Rayon, E.
    Benavente, R.
    Salvador, M. D.
    Sanchez, E.
    [J]. APPLIED SURFACE SCIENCE, 2014, 316 : 141 - 146
  • [2] Microstructure and photocatalytic activity of suspension plasma sprayed TiO2 coatings on steel and glass substrates
    Bannier, E.
    Darut, G.
    Sanchez, E.
    Denoirjean, A.
    Bordes, M. C.
    Salvador, M. D.
    Rayon, E.
    Ageorges, H.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2011, 206 (2-3) : 378 - 386
  • [3] Synergy and competition in nano- and micro-design of structural ceramics
    Bellosi, A
    Sciti, D
    Guicciardi, S
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (12) : 3295 - 3302
  • [4] Mechanical properties and microstructural evolution of alumina zirconia nanocompo sites by microwave sintering
    Benavente, R.
    Salvador, M. D.
    Penaranda-Foix, F. L.
    Pallone, E.
    Borrell, A.
    [J]. CERAMICS INTERNATIONAL, 2014, 40 (07) : 11291 - 11297
  • [5] Nanoindentation study of WC-12Co hardmetals obtained from nanocrystalline powders: Evaluation of hardness and modulus on individual phases
    Bonache, V.
    Rayon, E.
    Salvador, M. D.
    Busquets, D.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (12): : 2935 - 2941
  • [6] Enhanced properties of alumina-aluminium titanate composites obtained by spark plasma reaction-sintering of slip cast green bodies
    Borrell, Amparo
    Dolores Salvador, Maria
    Rocha, Victoria G.
    Fernandez, Adolfo
    Molina, Tamara
    Moreno, Rodrigo
    [J]. COMPOSITES PART B-ENGINEERING, 2013, 47 : 255 - 259
  • [7] Production and Characterisation of Metastable Al2O3-TiO2 Coatings Obtained by APS plus Quench
    Cano, I. G.
    Dosta, S.
    Caldeira, R.
    Miguel, J. R.
    Guilemany, J. M.
    [J]. ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 153 - 156
  • [8] Microstructure and indentation mechanical properties of YSZ nanostructured coatings obtained by suspension plasma spraying
    Carpio, P.
    Rayon, E.
    Pawlowski, L.
    Cattini, A.
    Benavente, R.
    Bannier, E.
    Salvador, M. D.
    Sanchez, E.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2013, 220 : 237 - 243
  • [9] Suspension plasma sprayed composite coating using amorphous powder feedstock
    Chen, Dianying
    Jordan, Eric H.
    Gell, Maurice
    [J]. APPLIED SURFACE SCIENCE, 2009, 255 (11) : 5935 - 5938
  • [10] THERMAL BARRIER COATINGS ON TURBINE-BLADES BY PLASMA SPRAYING WITH IMPROVED COOLING
    COSACK, T
    PAWLOWSKI, L
    SCHNEIDERBANGER, S
    STURLESE, S
    [J]. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1994, 116 (01): : 272 - 276