Estimation of fracture toughness in ZnO ceramics from indentation crack opening displacement measurements

被引：8

作者：

Roy, Tapatee Kundu ^{[1
]}

机构：

[1] Variable Energy Cyclotron Ctr, 1-AF Bidhan Nagar, Kolkata 700064, India

来源：

MEASUREMENT | 2019年 / 137卷

关键词：

Fracture toughness; Vickers indentation; Crack opening displacements; Scanning electron microscopy; ZnO ceramics; OXIDE; HARDNESS;

D O I：

10.1016/j.measurement.2019.01.069

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Crack opening displacement (COD) approach on indentation cracks has been successfully utilized in evaluating the fracture toughness of sintered ZnO samples. The study has been conducted on two varieties of sintered samples, made from commercial and ground ZnO powder, with applied loads of 9.8 and 19.6 N in a Vickers hardness tester. Crack opening profiles along the crack length have been measured by scanning electron microscopy (SEM). Fracture toughness in the ground and sintered ZnO sample has been estimated as 2.44 MPa.m(0.5) using the crack displacement data for the full length. The slightly lower toughness of 2.10-2.16 MPa.m(0.5) measured in the commercial variety of sintered ZnO has been related to the lesser plain strain modulus corresponding to lower density value. The obtained results are within 10% variation of the fracture toughness measured using indentation crack length method for the similar variety of ZnO samples. Irwin's equation validates the fracture toughness results for the near tip data, within 5 mu m from the crack tip. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：588 / 594

页数：7

共 34 条

[21] Evaluation of ultrasonically determined elasticity-porosity relations in zinc oxide
Martin, LP
Dadon, D
Rosen, M
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1996, 79 (05) : 1281 - 1289
[22] Acceptors in ZnO
McCluskey, Matthew D.
Corolewski, Caleb D.
Lv, Jinpeng
Tarun, Marianne C.
Teklemichael, Samuel T.
Walter, Eric D.
Norton, M. Grant
Harrison, Kale W.
Ha, Su
[J]. JOURNAL OF APPLIED PHYSICS, 2015, 117 (11)
[23] A FRACTURE-MECHANICS ANALYSIS OF INDENTATION-INDUCED PALMQVIST CRACK IN CERAMICS
NIIHARA, K
[J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1983, 2 (05) : 221 - 223
[24] Rice R.W, 1998, POROSITY CERAMICS PR, DOI DOI 10.1017/CBO9781107415324.004
[25] Rocha-Rangel Enrique, 2011, Fracture Toughness Determinations by Means of Indentation Fracture
[26] INSITU MEASUREMENTS OF BRIDGED CRACK INTERFACES IN THE SCANNING ELECTRON-MICROSCOPE
RODEL, J
KELLY, JF
LAWN, BR
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (11) : 3313 - 3318
[27] Assessing hardness and fracture toughness in sintered zinc oxide ceramics through indentation technique
Roy, Tapatee Kundu
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 640 : 267 - 274
[28] Evaluation of mechanical hardness and fracture toughness of Co and Al co-doped ZnO
Siddheswaran, R.
Mangalaraja, R. V.
Avila, Ricardo E.
Manikandan, D.
Jeyanthi, C. Esther
Ananthakumar, S.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 456 - 461
[29] UNDERWOOD EE, 1973, METALS HDB, V8, P37
[30] Zinc oxide nanostructures: growth, properties and applications
Wang, ZL
[J]. JOURNAL OF PHYSICS-CONDENSED MATTER, 2004, 16 (25) : R829 - R858

← 1 2 3 4 →