Effect of ZnO with Different Specific surface area on the Cure Characteristics and Mechanical Properties of Carbon Black-filled NR/SBR Compounds

被引：0
|
作者：
Brodska, A. [1 ]
Hrdlicka, Z. [1 ]
Kuta, A. [1 ]
机构：
[1] Prague Inst Chem Technol, Fac Chem Technol, Dept Polymers, CR-16628 Prague 6, Dejvice, Czech Republic
来源：
KGK-KAUTSCHUK GUMMI KUNSTSTOFFE | 2012年 / 65卷 / 09期
关键词：
Zinc oxide; Rubber; Activator; specific surface Area; SULFUR VULCANIZATION;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Zinc oxide significantly influences the properties of rubber, both in terms of processing parameters of rubber compounds, and physical-mechanical properties. This paper presents a comparison of five types of zinc oxide with different Specific surface area. Using these types of ZnO, compounds combining NR and SBR were prepared. These compounds were vulcanized at 150 degrees C. Tensile properties, solvent swelling and hardness of the cured compounds were investigated. According to the obtained results, for similar formulations, it is possible to reduce the ZnO dosage down to 2 phr, which could be economically advantageous and could help to solve some environmental problems as well.
引用
收藏
页码：45 / 48
页数：4
相关论文
共 50 条
  • [31] Electrical and mechanical properties of SBR filled with carbon black-silica blends
    Ward, A. A.
    Khalf, A. I.
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2007, 60 (11): : 623 - 630
  • [32] Mechanical Properties of Carbon Black-Filled High-Density Polyethylene Antistatic Composites
    Liang, J. Z.
    Yang, Q. Q.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (03) : 295 - 304
  • [33] Effect of Molecular Orientation on the Fracture Behavior of Carbon Black-Filled Natural Rubber Compounds
    Marano, Claudia
    Calabro, Roberto
    Rink, Marta
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2010, 48 (13) : 1509 - 1515
  • [34] Effect of the Chemical Composition on Fatigue Properties of Carbon Black-Filled Natural Rubber
    Delahaye, G.
    Guillaume, S. M.
    Rosselgong, J.
    Ruellan, B.
    Jeanneau, I.
    Le Cam, J. -B.
    ADVANCEMENT OF OPTICAL METHODS AND FRACTURE AND FATIGUE, VOL 3, 2023, 2024, : 79 - 83
  • [35] Influence of different types of antioxidants on the aging behavior of carbon-black filled NR and SBR vulcanizates
    Osswald, Katja
    Reincke, Katrin
    Schossig, Marcus
    Soekmen, Selin
    Langer, Beate
    POLYMER TESTING, 2019, 79
  • [36] Effect of Modified Carbon Black on the Processing of NR- and SBR-based Compounds
    Adhikary, Abhijit
    Sengupta, Pranab Kumar
    Mukhopadhyay, Rabindra
    PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 2009, 25 (03) : 165 - 186
  • [37] Cure Characteristics and Mechanical Properties of Ternary Accelerator System in NR/BR Compounds
    Kim, Il-Jin
    Kim, Wook-Soo
    Lee, Dong-Hyun
    Bae, Jong-Woo
    Byon, Young-Hoo
    Kim, Wonho
    KOREAN CHEMICAL ENGINEERING RESEARCH, 2009, 47 (04): : 403 - 409
  • [38] Influence of microstructure in nitrile polymer on curing characteristics and mechanical properties of carbon black-filled rubber composite for seal applications
    Lee, Young Seok
    Park, Seong Hwan
    Lee, Jong Cheol
    Ha, KiRyong
    JOURNAL OF ELASTOMERS AND PLASTICS, 2016, 48 (08): : 659 - 676
  • [39] Utilization of composite ZnO in SBR/BR compounds and its effect on the cure and physicomechanical properties
    Bingol, Cansu Boruban
    Polat, Seyda
    Atapek, Hakan
    EXPRESS POLYMER LETTERS, 2024, 18 (05): : 461 - 474
  • [40] Effect of Blend Ratio on Cure Characteristics, Mechanical Properties, and Aging Resistance of Silica-filled ENR/SBR Blends
    Ngudsuntear, Chanin
    Limtrakul, Sunun
    Vatanatham, Terdthai
    Wichien, Adul Na
    Rempel, Garry L.
    Arayapranee, Wanvimon
    INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2014, 5 (01): : 11 - 24
12345